HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.0h release notes (5697-7961 - Page 18

Fabric OS 6.1.0 fixes Table 6 lists defects closed in the Fabric OS 6.1.0 firmware release. Table 6 Fabric OS 6.1.0 closed defects Closed defect summary Solution Autonegotiation with specific HBAs does not bring the ports to the correct maximum speed. Fixed in Fabric OS 6.1.0 An FC Analyzer trace shows an FCR port is receiving periodic RRQ and ABTS frames. Fixed in Fabric OS 6.1.0 HAReboot on MP Router 400 (with the edge fabric is an EOS fabric) Fixed in Fabric OS 6.1.0 results in port bouncing due to no BB credits. After switchdisable and switchenable all FCR switches, from Fixed in Fabric OS 6.1.0 the edge fabric translate domain are missing. Unable to access CUP Port on local or cascaded switch through DC Director. Fixed in Fabric OS 6.1.0 In some rare scenarios, application hangs are noticed on the Server Fixed in Fabric OS 6.1.0 when FCFW related actions are taken on the fabric. Management server daemon (msd) panic on switch during fabric bring Fixed in Fabric OS 6.1.0 up. In a FICON configuration, VE port persists in offline state after link down when GbE link is routed through a network switch Fixed in Fabric OS 6.1.0 Unable to establish connectivity between HBA and Storage. Fixed in Fabric OS 6.1.0 CP failover on a 4/256 SAN Director. Fixed in Fabric OS 6.1.0 FCFW devices: I/O fails on the backbone fabric. Fixed in Fabric OS 6.1.0 LD ISL sometimes comes up in VC_RDY mode, not QoS mode. Fixed in Fabric OS 6.1.0 During constant power-cycle test, one of the switches panicked due to Fixed in Fabric OS 6.1.0 a memory allocation failure. Request change to parameters passed to Java running on the PC. Fixed in Fabric OS 6.1.0 When ports are segmented, two B-model fabrics are shown connected Fixed in Fabric OS 6.1.0 to each other even though safe zoning state differs. Subnetted FCIP port sends MAC level broadcast instead of the routers Fixed in Fabric OS 6.1.0 MAC. In some cases, frame loss is observed during normal FICON I/O. Fixed in Fabric OS 6.1.0 TopTalkers counters are inaccurate when enabled on more than one Fixed in Fabric OS 6.1.0 Fx_Port at a time. Top Talker F_Port monitor is broken, only one F_Port can be monitored Fixed in Fabric OS 6.1.0 at one switch. Same test case passed on Beta frame. FICON Emulation Error running to STK/SUN tape drives. Fixed in Fabric OS 6.1.0 18