HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.0h release notes (5697-7961 - Page 19

Closed defect summary Solution An "ipfilter --transabort" command running in one Telnet session can be aborted from another Telnet session. Fixed in Fabric OS 6.1.0 Cannot set "Portlog events enable" accurately. Fixed in Fabric OS 6.1.0 The DC Director may ASSERT in a specific test scenario while running Fixed in Fabric OS 6.1.0 a particular FICON test program (SAK IRNDUP). Brocade 4-Gb SAN Switch for HP c-Class BladeSystem power-on-self- Fixed in Fabric OS 6.1.0 test (POST) failure on chassis power on. Flooding of an unknown inter-switch FDMI command from another vendor's switch is causing the switch to crash. Fixed in Fabric OS 6.1.0 DC Director port blades are re-initialized during supportsave. Fixed in Fabric OS 6.1.0 2-Gb Channels fail to come online from T-Rexx mainframe to a 128- Fixed in Fabric OS 6.1.0 port 4/256 SAN Director. Occasional kernel panic during reboot in AG setup. Fixed in Fabric OS 6.1.0 Under very rare conditions, and in a configuration where there are multiple paths configured to reach multiple devices, some paths were observed not coming online. Fixed in Fabric OS 6.1.0 During fastwrite, a 3rd party device drops a status frame due to Fixed in Fabric OS 6.1.0 data alignment. HaFailover not working after upgrading firmware from Fabric OS Fixed in Fabric OS 6.1.0 5.0 to 5.2.0a using firmrwaredownload -s on each CP. Heart beat missing being reported by CP - Standby CP reboots. Fixed in Fabric OS 6.1.0 FICON Virtual Tape Pipelining does not function correctly with specific Fixed in Fabric OS 6.1.0 tape devices. Blade fault does not result in LIRR and async status. Fixed in Fabric OS 6.1.0 Firmware upgrade on 4/8 SAN Switch and 4/16 SAN Switch to Fabric OS 6.0.0 will cause the switch to report marginal state. Fixed in Fabric OS 6.1.0 CUP Set Offline inline command not presenting status before going Fixed in Fabric OS 6.1.0 offline. Usability: Ctrl-C in legacy configdownload code is not blocked during downloads. Fixed in Fabric OS 6.1.0 Switch faults if Management Server Domain is invalid, limited commands available. Fixed in Fabric OS 6.1.0 When a switch's IDID mode is currently OFF and we disable the switch, Fixed in Fabric OS 6.1.0 the rest of the switches in the fabric get a premature duplicate message. Async error reporting events are lost if detected immediately after switch boot. Fixed in Fabric OS 6.1.0 Fabric Manager: Configdownload actually downloads all the disruptive parameters in the Validation step in Fabric Manager, when the switch is in a disabled state. Fixed in Fabric OS 6.1.0 HP StorageWorks Fabric OS 6.1.0h release notes 19