HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.0h release notes (5697-7961 - Page 28

Fabric OS 6.1.0f fixes, Table 12

Page 28 highlights

Fabric OS 6.1.0f fixes Table 12 lists defects closed in this Fabric OS 6.1.0f firmware release. Table 12 Fabric OS 6.1.0f closed defects Closed defect summary A failed Pause frame, sent during firmwaredownload process in Interop Modes 2 and 3, causes a fabric rebuild Solution Fixed in Fabric OS 6.1.0f. Workaround: Use the firmwaredownload -o option to override the uncooperative HCL feature. A device with a slow initialization sequence may cause the switch to Fixed in Fabric OS 6.1.0f. mistakenly establish virtual channels on an F_Port. A CRC error was observed between HP StorageWorks 8/40 SAN Fixed in Fabric OS 6.1.0f. Switch and HP StorageWorks 8/80 SAN Switch with a particular SFP type. The Fibre Channel fastwrite path does not recover after restoring the Fixed in Fabric OS 6.1.0f. DWDM connection. Devices on the backbone have no access to remote devices after a Fixed in Fabric OS 6.1.0f. switch on the backbone, with both FCR and FCIP being utilized, exper- Workaround: To recover, disable and iences a hafailover or hareboot. then enable the VEX/EX ports. Port RSCNs are sent to DPC (VIs and VTs) every time the configuration Fixed in Fabric OS 6.1.0f. changes, which is unrelated to VI/VT. This affects any application that uses frame redirect zoning. With both RD zone and TI zone configured, a connectivity issue can occur after hafailover or hareboot. Fixed in Fabric OS 6.1.0f. Workaround: Run the efgdisable and efgenable commands. Fabric OS 6.1.0g fixes Table 13 lists defects closed in the Fabric OS 6.1.0g firmware release. Table 13 Fabric OS 6.1.0g closed defects Closed defect summary Solution During firmwaredownload, a rare race condition could occur, causing /etc/inetd.conf to be erased, and leading to the user being unable to access the switch via the network. Fixed in Fabric OS 6.1.0g. A Web Tools performance issue occurs, where it freezes for a few seconds approximately every 15 seconds. The Web Tools light stops blinking and cannot scroll any windows. Fixed in Fabric OS 6.1.0g. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

Fabric OS 6.1.0f fixes
Table 12
lists defects closed in this Fabric OS 6.1.0f firmware release.
Table 12 Fabric OS 6.1.0f closed defects
Solution
Closed defect summary
Fixed in Fabric OS 6.1.0f.
Workaround: Use the
firmwaredownload —o
option to
override the uncooperative HCL
feature.
A failed Pause frame, sent during
firmwaredownload
process in
Interop Modes 2 and 3, causes a fabric rebuild
Fixed in Fabric OS 6.1.0f.
A device with a slow initialization sequence may cause the switch to
mistakenly establish virtual channels on an F_Port.
Fixed in Fabric OS 6.1.0f.
A CRC error was observed between HP StorageWorks 8/40 SAN
Switch and HP StorageWorks 8/80 SAN Switch with a particular SFP
type.
Fixed in Fabric OS 6.1.0f.
The Fibre Channel fastwrite path does not recover after restoring the
DWDM connection.
Fixed in Fabric OS 6.1.0f.
Workaround: To recover, disable and
then enable the VEX/EX ports.
Devices on the backbone have no access to remote devices after a
switch on the backbone, with both FCR and FCIP being utilized, exper-
iences a
hafailover
or
hareboot
.
Fixed in Fabric OS 6.1.0f.
Port RSCNs are sent to DPC (VIs and VTs) every time the configuration
changes, which is unrelated to VI/VT. This affects any application that
uses frame redirect zoning.
Fixed in Fabric OS 6.1.0f.
Workaround: Run the
efgdisable
and
efgenable
commands.
With both RD zone and TI zone configured, a connectivity issue can
occur after
hafailover
or
hareboot
.
Fabric OS 6.1.0g fixes
Table 13
lists defects closed in the Fabric OS 6.1.0g firmware release.
Table 13 Fabric OS 6.1.0g closed defects
Solution
Closed defect summary
Fixed in Fabric OS 6.1.0g.
During
firmwaredownload
, a rare race condition could occur,
causing
/etc/inetd.conf
to be erased, and leading to the user
being unable to access the switch via the network.
Fixed in Fabric OS 6.1.0g.
A Web Tools performance issue occurs, where it freezes for a few
seconds approximately every 15 seconds. The Web Tools light stops
blinking and cannot scroll any windows.
28