HP Surestore 15 Slot with DLT4000 HP SureStore DLT Tape Library Models 4115w/4 - Page 87
Exercise, Vertical, Translate, Magazine, Drive, Exchange, Pass/fail, Mailslot, Inventory, Check,
View all HP Surestore 15 Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Operating the Library Running an Internal Test Library Operation Table 3-6 Internal Tests Test Name Description EXERCISE MECH EXCHANGE DEMO IO DRIVE IO MAGAZINE IO MAILSLOT INVENTORY CHECK TEST TRANSLATE TEST VERTICAL Runs the VERTICAL TEST, TRANSLATE TEST, MAGAZINE IO, and DRIVE IO tests. Each test is run one time per test loop. Used by service personnel only. Do not run this test if the library contains tape cartridges with file system data on them. This test moves randomly chosen cartridges to random storage slot locations. This test displays FAIL if there are no cartridges in the library or if all storage slots are full. For best results, the library should contain as many cartridges as there are drives, plus two additional cartridges. The transport must be empty. Makes a combination of moves with a PASS/FAIL result. If the drives are empty, a tape cartridge is moved from a randomly chosen full slot to a randomly chosen drive. If the drives are full, a tape cartridge is moved from a randomly chosen drive to a randomly chosen storage slot. It then moves the cartridge back to its original location. This test displays FAIL if there are no cartridges in the library or if all storage slots are full. The transport and the mailslot must be empty. Makes a combination of moves with a PASS/FAIL result. It moves a tape cartridge from a random full slot to a random empty slot. It then moves the tape cartridge back to its original storage slot. This test displays FAIL if there are no cartridges in the library or if all storage slots are full. The drives, transport, and the mailslot must be empty. Makes a combination of moves with a PASS/FAIL result. It moves a tape cartridge from a random full slot to the mailslot. It then moves the tape cartridge back to its original storage slot. This test displays FAIL if there are no cartridges in the library or if all storage slots are full. The drives, transport, and the mailslot must be empty. Functions the same as the SCSI Initialize Element Status command. This test physically scans the entire unit to determine which storage slots contain tape cartridges and if the drives contain cartridges. NOTE: This test will appear as ISTAT TEST in all front panel error messages. Translates from side to side. No tape cartridges are required. Moves the transport mechanism up and down the full length of the rail. Returns PASS/FAIL. No tape cartridges are required. 3-33