HP Surestore 15 Slot with DLT4000 HP SureStore DLT Tape Library Models 4115w/4 - Page 91

Drive, Status, Failed, Change, Confirmed, Online, Repair, Power, Setting

Page 91 highlights

Library Operation Operating the Library Using Online Drive Replacement 5. Press NEXT or PREV until DRIVE STATUS displays, then press ENTER. DRV 1 ON GOOD displays. • If the damaged tape is in drive 1, press ENTER. • If the damaged tape is in drive 2, press NEXT until DRV 2 ON GOOD displays, then press ENTER. DRV # ON GOOD displays, where "#" is the drive number and ON GOOD is flashing. 6. Press NEXT until DRV # OFF FAILED displays then press ENTER. 7. CHANGE CONFIRMED displays briefly, then ONLINE REPAIR * displays. Press ENTER. 8. DRIVE POWER * displays. 9. Press NEXT or PREV until DRIVE STATUS displays, then press ENTER. 10. Press NEXT or PREV until DRV # OFF FAILED displays (where "#" is the number of the drive that was just taken off-line) then press ENTER. 11. DRV # OFF FAILED displays, where "#" is the drive number and OFF FAILED is flashing. 12. Press NEXT until DRV # ON GOOD displays, then press ENTER. 13. SETTING UP DRIVE displays briefly while the drive communication tests run, following by CHANGE CONFIRMED and then ONLINE REPAIR *. 14. Press CANCEL twice to return to the drive numbers and status indicators ("ready" state). 15. Try reading the damaged tape again. • If the tape can be read, back up data from the damaged cartridge to another tape cartridge and discard the damaged one. • If the tape cannot be read, call your service representative. 3-37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136

3-37
Operating the Library
Using Online Drive Replacement
Library Operation
5.
Press
NEXT
or
PREV
until
DRIVE
STATUS
displays, then press
ENTER
.
DRV
1
ON
GOOD
displays.
If the damaged tape is in drive 1, press
ENTER
.
If the damaged tape is in drive 2, press
NEXT
until
DRV
2
ON
GOOD
displays,
then press
ENTER
.
DRV
#
ON
GOOD
displays, where “#” is the drive number and
ON
GOOD
is
flashing.
6.
Press
NEXT
until
DRV
#
OFF
FAILED
displays then press
ENTER
.
7.
CHANGE
CONFIRMED
displays briefly, then
ONLINE
REPAIR
*
displays.
Press
ENTER
.
8.
DRIVE
POWER
*
displays.
9.
Press
NEXT
or
PREV
until
DRIVE
STATUS
displays, then press
ENTER
.
10. Press
NEXT
or
PREV
until
DRV
#
OFF
FAILED
displays (where “#” is the
number of the drive that was just taken off-line) then press
ENTER
.
11.
DRV
#
OFF
FAILED
displays, where “#” is the drive number and
OFF
FAILED
is flashing.
12. Press
NEXT
until
DRV
#
ON
GOOD
displays, then press
ENTER
.
13.
SETTING
UP
DRIVE
displays briefly while the drive communication tests run,
following by
CHANGE
CONFIRMED
and then
ONLINE
REPAIR
*
.
14. Press
CANCEL
twice to return to the drive numbers and status indicators (“ready”
state).
15. Try reading the damaged tape again.
If the tape can be read, back up data from the damaged cartridge to another
tape cartridge and discard the damaged one.
If the tape cannot be read, call your service representative.