HP Surestore 15 Slot with DLT4000 HP SureStore DLT Tape Library Models 4115w/4 - Page 95
Cannot read the tape.
View all HP Surestore 15 Slot with DLT4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Operating the Library Troubleshooting Problem DO INVENTORY TEST displays (initialize element status). Cannot write to the tape. Cannot read the tape. What to do • Power cycle the library by pressing the power switch off and then on again. (See the caution note at the end of this table.) • Run the INVENTORY CHECK test under the TEST * menu. • Check the host file system access permissions. • Check the write-protect tab on the cartridge to assure write-enabled status. • Check the application software. • Check the host file system access permissions. • Verify that the correct tape type is used (See "Choosing Tape Cartridges" on page 2-3.) • Check the application software. CAUTION Do not press the library power switch until all SCSI peripherals connected to host are shut down. Pressing the power button when the SCSI system is active can cause data loss and/or problems with the SCSI interface. Library Operation 3-41