HP Surestore Tape Library Model 4/48 HP DLT Tape Library 28/48-Slot - User& - Page 34

Step 4: Connect the Library to the Host, Table 2-3, Drive SCSI Connection Options, Library Model

Get HP Surestore Tape Library Model 4/48 PDF manuals and user guides View all HP Surestore Tape Library Model 4/48 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Library Installation Step 4: Connect the Library to the Host Step 4: Connect the Library to the Host 1. Ensure that the host has been properly shut down and powered off. 2. Remove the back panel (lift up on the bottom of the panel, then pull it away). 3. Use SCSI cables to connect the drives to the host, as explained in the following table. Table 2-3 Library Model DLT4000 2/28 DLT4000 4/48 DLT7000 2/28 DLT7000 4/48 Drive SCSI Connection Options SCSI Configuration Non-daisy chained Daisy chained Connect drive ports 1 and 2 to Connect drive ports 1 and 2 together; their own host SCSI cards. connect to a single host SCSI card. Connect drive ports 1, 2, 3, and Connect drive ports 1 and 2 together; 4 to their own host SCSI cards. connect to a single host SCSI card. Connect drive ports 1 and 2 to their own host SCSI cards. Connect drive ports 1, 2, 3, and 4 to their own host SCSI cards. Connect drive ports 3 and 4 together; connect to a single host SCSI card. Not supported Not supported 4. Connect the library (bus 0) to a dedicated host SCSI card. NOTE Connecting other peripherals to the library or drive buses is not supported. 2-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
2-6
Library Installation
Step 4: Connect the Library to the Host
Step 4: Connect the Library to the Host
1.
Ensure that the host has been properly shut down and powered off.
2.
Remove the back panel (lift up on the bottom of the panel, then pull
it away).
3.
Use SCSI cables to connect the drives to the host, as explained in the
following table.
4.
Connect the library (bus 0) to a dedicated host SCSI card.
NOTE
Connecting other peripherals to the library or drive buses is not supported.
Table 2-3
Drive SCSI Connection Options
Library Model
SCSI Configuration
Non-daisy chained
Daisy chained
DLT4000 2/28
Connect drive ports 1 and 2 to
their own host SCSI cards.
Connect drive ports 1 and 2 together;
connect to a single host SCSI card.
DLT4000 4/48
Connect drive ports 1, 2, 3, and
4 to their own host SCSI cards.
Connect drive ports 1 and 2 together;
connect to a single host SCSI card.
Connect drive ports 3 and 4 together;
connect to a single host SCSI card.
DLT7000 2/28
Connect drive ports 1 and 2 to
their own host SCSI cards.
Not supported
DLT7000 4/48
Connect drive ports 1, 2, 3, and
4 to their own host SCSI cards.
Not supported