HP T5630w Microsoft Windows Embedded Standard 2009 (WES) v. 5.1.810 and later - Page 38
flash size capacity than the source unit. The following table lists sample capture and deploy scenarios
UPC - 884962252574
View all HP T5630w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
6. After you perform these actions, the HP ThinState Capture tool displays the following screen. Please follow the on-screen instructions. You can now use the USB flash drive to deploy the captured image to another HP thin client of the exact same model and hardware with equal or greater flash size capacity. NOTE: In this new version of ThinState Capture, you may be able to capture the image from a greater sized flash and deploy it to a lesser sized flash, depending on the size of the captured image. You can now use the USB flash drive to deploy the captured image to another HP thin client of the exact same model and hardware. With prior images, the target unit would need to have had an equal or greater flash size capacity than the source unit. The following table lists sample capture and deploy scenarios using images prior to 5.1810: Capture From (Source): 2GB Flash 1GB Flash Deploy To (Target): 2GB Flash 1GB Flash X X X With the new Thinstate Capture (starting with image 5.1.810), you may be able to capture the image from a greater sized flash and deploy it to a lesser sized flash. The following table lists sample capture and deploy scenarios using image 5.1810 or newer: Deploy To (Target): 2GB Flash 1GB Flash Capture From (Source): 2GB Flash X X* 1GB Flash X X *Assuming the actual size of the image is less than the size of the flash. 30 Chapter 4 Applications ENWW