HP T5700 Terminal Emulation User's Guide (XPe) - Page 35
Printer Port Settings, Use Network Printer LPR
View all HP T5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Getting Started Printer Port Settings The Printer Port Settings dialog box enables you to direct print data to a printer handled by the Print Manager, a specific port, or a network printer. Direct Print Data To The Print Manager The Current System Printer Driver box displays the name of the currently selected system printer when both the Use Network Printer (LPR) and Print Direct To Port options are not selected. Clicking the Configure button will display a Print Manager dialog box which enables you to specify printer settings. If you find a through print results in data being split into lines, each treated as a separate print job, specify a time in the Seconds Close Delay box (e.g. 5 seconds). This will enable the next line of data to be sent before the print job is assumed to have finished and therefore prevents the print job from being closed prematurely. When set to 0, printing will not start until a 'print end of job' command is received from the host. Entering any other number will cause printing to start after the specified number of seconds have elapsed, regardless of whether the 'print end of job' command has been received from the host. Direct Print Data To A Specific Port To direct print data to a specific port, select Print Direct To Port and specify the Printer Port. Selecting the FormFeed Terminator option will cause the printer to advance the paper to the top of the form when it has finished printing. 2-23