HP T5735 Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients
HP T5735 - Compaq Thin Client Manual
UPC - 883585606238
View all HP T5735 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP T5735 manual content summary:
- HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 1
Hardware Reference Guide HP Compaq t5730/t5735 Thin Clients - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 2
warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP Company. Hardware Reference Guide Business PCs Second Edition (December 2007) First Edition - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 3
About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 4
iv About This Book - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 5
Special Mouse Functions ...8 Serial Number Location ...9 2 Hardware Changes Access Panel 15 Installing Thin Client Options ...16 Installing the USB Device 17 Removing and Replacing the Battery 17 Installing the PCI Expansion Module and PCI Card 18 External Drives ...19 Appendix A Specifications - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 6
Appendix C Mounting the Thin Client HP Quick Release ...23 Supported Mounting Options 25 Non-supported Mounting Option 27 Appendix D Thin Client Operation Routine Thin Client Care ...28 Supported Orientations ...28 Non-supported Orientation ...30 Appendix E Electrostatic Discharge Preventing - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 7
model, visit http://h18004.www1.hp.com/products/thinclients/index.html and search for a specific thin client model. The following features are common to all HP thin clients: ● no moving parts ● no hard drives or diskette drives ● 5-minute setup time ● central deployment and management using Altiris - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 8
) audio connector (3) Flash activity LED (7) Universal serial bus (USB) connectors (2) (4) Line-in (microphone) connector * For more information, refer to the model-specific QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/ QuickSpecs_Archives/QuickSpecs_Archives.html. 2 Chapter - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 9
(1) Wireless antenna* (2) Secure USB compartment (3) Cable lock slot *Available on some models. Refer to the model-specific QuickSpecs at www.hp.com for details. Figure 1-3 Top components, internal view (1) Wireless antenna connector* (2) Secure USB compartment ports (2) (3) Cable lock - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 10
(6) DVI-D connector (3) Universal serial bus (USB) connectors (4) (7) VGA connector (4) PS/2 connectors (2) (8) Power connector For more information, see the model-specific QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/ QuickSpecs_Archives/QuickSpecs_Archives.html. 4 Chapter - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 11
the antenna. Installing the Rubber Feet To install the rubber feet: 1. Locate the holes in the corners of the left side of the thin client. 2. Remove the feet from their backing. 3. Align the feet with their holes and press them in securely. Figure 1-6 Installing the rubber feet Installing - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 12
slide the stand about 1.26 cm (1/2 inch) toward the front of the unit and lift the stand off the unit (2). Figure 1-8 Removing the stand 6 Chapter 1 Product Features - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 13
other software applications. Includes the following: Insert, Home, Page Up, Delete, End, and Page Down. Hold Ctrl and Alt while pressing Delete to restart the thin client. Using the Keyboard 7 - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 14
key combinations also work on HP Compaq t5730/t5735 thin clients: Alt + Esc Alt + Tab Alt + Shift + Tab Cycles through minimized applications. Cycles through open applications. Switches to the previous session. Special Mouse Functions Most software applications support the use of a mouse. The - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 15
Serial Number Location Every thin client includes a unique serial number located as shown in the following illustration. Have this number available when contacting HP customer service for assistance. Figure 1-10 Serial number location Serial Number Location 9 - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 16
can damage the electronic components of the thin client or optional equipment. Before beginning these procedures PCI Expansion Module and PCI Card on page 18 ● Removing and Replacing the Battery on page 17 NOTE: Option kits include more detailed installation instructions. 7. Replace the side access - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 17
10. Turn on the monitor, the thin client, and any devices you want to test. 11. Load any necessary drivers. NOTE: You can download select hardware drivers from HP at http://www.hp.com/country/us/eng/ support.html. 12. Reconfigure the thin client, if necessary. General Hardware Installation Sequence - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 18
the thin client. Along with providing a hidden location, the secure USB compartment can be locked by the optional security cable lock. CAUTION: The ambient temperature inside of the secure USB compartment can reach up to 55° C (131° F) in worst case conditions. Make sure the specifications for - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 19
1. Place the cover on top of the unit so it is offset about 1.27 cm (1/2 inch) toward the rear of the unit, allowing the tabs on the cover to align and insert into the slots on the chassis (1). 2. Slide the cover toward the front of the unit until it locks in place and the cover is flush with the - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 20
access panel, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet. To remove the access remove the metal side cover when installing a PCI Expansion Module. You must remove the metal side cover to access internal components such as the battery or the - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 21
the cover with the holes in the chassis (1). 2. Insert and tighten the four screws (2). Figure 2-5 Replacing the metal side cover To replace the access panel: 1. Place the access panel on the side of the unit, offset about 6.35 mm (1/4 inch) toward the rear of the unit (1). 2. Slide the panel toward - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 22
panel to the chassis (3). Figure 2-6 Replacing the side access panel Installing Thin Client Options Various options can be installed on the thin client: ● Installing the USB Device on page 17 ● Installing the PCI Expansion Module and PCI Card on page 18 ● Removing and Replacing the Battery on page - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 23
Battery Before beginning the replacement process, review General Hardware Installation Sequence on page 10 for procedures you should follow before and after installing or replacing hardware. WARNING! Before removing the side access panel, ensure that the thin client is turned off and the power cord - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 24
and after installing or replacing hardware. WARNING! Before removing the side access panel, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet. Follow the instructions included in the PCI Expansion Module option kit. CAUTION: Be sure to use the - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 25
t5730/t5735. For more information about these drives, visit http://www.hp.com/products/thinclientsoftware, or refer to the instructions that accompany the option. For more information about available options, visit the HP Web site at http://h30143.www3.hp.com/ configure2.cfm. Installing Thin Client - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 26
A Specifications Table A-1 HP Compaq t5730/t5735 Thin Client Dimensions Width (front to back) 46 mm 1.811 in may be limited by the type and number of options installed. ** The operating temperature range when the thin client is attached to a flat panel using the HP Quick Release is 50° to 95° - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 27
Table A-1 HP Compaq t5730/t5735 Thin Client (continued) Rated Line Frequency 50-60 Hz Power Output (maximum) 50 W Rated Output Current (maximum) 4.16 A Output Voltage +12 V DC 50-60 Hz 50 W 4.16 A +12 V DC 21 - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 28
Securing the Thin Client The HP Compaq t5730/t5735 thin client is designed to accept a security cable lock. This cable lock prevents unauthorized removal of the thin client, as well as locking the secure compartment. To order this option, visit the HP Web site at http://h30143.www3.hp.com/configure2 - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 29
allowing you to mount the thin client in a variety of orientations. NOTE: When mounting to a thin client, use the 10 mm screws supplied with the Quick Release Kit. Figure C-1 HP Quick Release To order this option, visit the HP Web site at http://h30143.www3.hp.com/configure2.cfm. HP Quick Release 23 - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 30
four 10 mm screws included in the mounting device kit, attach one side of the HP Quick Release to the thin client as shown in the following illustration. Figure C-2 Connecting the HP Quick Release to the thin client 2. Using four screws included in the mounting device kit, attach the other side of - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 31
of the supported and not supported mounting options for the mounting bracket. ● You can mount a thin client between a flat panel monitor and the wall. Figure C-5 Thin client mounted with flat panel on wall ● You can mount the thin client on the back of a flat panel monitor stand. HP Quick Release - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 32
Figure C-6 Thin client mounted on back of monitor stand ● You can mount the thin client on a wall. Figure C-7 Thin client mounted on wall ● You can mount the thin client under a desk. Figure C-8 Thin client mounted under desk 26 Appendix C Mounting the Thin Client - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 33
a thin client in an non-supported manner could result in failure of the HP Quick Release and damage to the thin client and/or other equipment. Do not mount the thin client on a flat panel monitor stand, between the panel and the stand. Figure C-9 Unsupported mounting position-thin client between - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 34
for the thin client, see Specifications on page 20. ● Keep liquids away from the thin client and keyboard. ● Turn off the thin client and wipe the exterior with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish. Supported Orientations HP supports the following - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 35
Figure D-2 Horizontal orientation ● You can lay the thin client under a monitor stand with at least one inch of clearance. Figure D-3 Under monitor stand Supported Orientations 29 - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 36
Non-supported Orientation HP does not support the following orientation for the thin client. CAUTION: Non-supported placement of thin clients could result in operation failure and/or damage to the devices. CAUTION: Thin clients require proper ventilation to maintain operating temperature. Do not - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 37
Use a wrist strap connected by a ground cord to a grounded Thin Client chassis. Wrist straps are flexible straps of 1 megohm +/- 10 percent HP authorized dealer, reseller, or service provider. NOTE: For more information about static electricity, contact an HP authorized dealer, reseller, or service - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 38
. NOTE: For environmental nonoperating ranges, see Specifications on page 20. Important Service Repair Information In all cases, remove and safeguard all external options before returning the thin client to HP for repair or exchange. In countries that support customer mail-in repair by returning the - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 39
23 humidity specifications 20 I installation sequence 10 installing antenna 5 cable lock 22 external drives 19 hardware 10 HP Quick Release 23 MultiBay diskette drive 19 PCI expansion card 18 PCI expansion module 18 PCI Express expansion card 18 rubber feet 5 stand 6 thin client onto HP Quick - HP T5735 | Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 40
15 specifications altitude 20 dimensions 20 hardware 20 V VGA connector location 4 W warnings electric shock 10, 12, 14, 17, 18 fire 10 Web sites Altiris 1 downloads 11 external USB drives 19 HP hardware drivers 11 options 1, 22, 23 QuickSpecs 2 thin client hardware and software 1 thin client
Hardware Reference Guide
HP Compaq t5730/t5735 Thin Clients