HP T5735 Hardware Reference Guide: HP Compaq t5730/t5735 Thin Clients - Page 12
Installing the Stand, Removing the Stand
UPC - 883585606238
View all HP T5735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the Stand To install the stand: 1. Turn unit upside down. 2. Locate the slots on the bottom of the unit into which the tabs on the stand fit. 3. Insert the tabs into the slots (1), and then slide the stand about 1.26 cm (1/2 inch) toward the back of the unit until it locks into place (2). Figure 1-7 Installing the stand Removing the Stand To remove the stand: 1. Turn unit upside down. 2. Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit and lift the stand off the unit (2). Figure 1-8 Removing the stand 6 Chapter 1 Product Features
Installing the Stand
To install the stand:
1.
Turn unit upside down.
2.
Locate the slots on the bottom of the unit into which the tabs on the stand fit.
3.
Insert the tabs into the slots (1), and then slide the stand about 1.26 cm (1/2 inch) toward the back
of the unit until it locks into place (2).
Figure 1-7
Installing the stand
Removing the Stand
To remove the stand:
1.
Turn unit upside down.
2.
Press the tab (1), and then slide the stand about 1.26 cm (1/2 inch) toward the front of the unit and
lift the stand off the unit (2).
Figure 1-8
Removing the stand
6
Chapter 1
Product Features