HP TouchSmart 610-1150xt Wall-Mounting your HP TouchSmart User Guide
HP TouchSmart 610-1150xt Manual
View all HP TouchSmart 610-1150xt manuals
Add to My Manuals
Save this manual to your list of manuals |
HP TouchSmart 610-1150xt manual content summary:
- HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 1
Wall-Mounting your HP TouchSmart User Guide - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 2
forth in the express statements accompanying such products and services. Nothing herein should be construed as constituting an the ability of this device to communicate with other 802.11n WLAN devices. HP supports lawful use of technology and does not endorse or encourage the use of our products - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 3
Table of contents 1 Preparing your HP TouchSmart PC for wall-mounting 1 What you need ...1 Safety information ...1 Before removing the stand ...2 Removing the computer stand ...2 Installing the VESA adapter plate 7 2 Reinstalling the stand on your HP TouchSmart PC 10 What you need ...10 Safety - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 4
iv Wall-Mounting your HP TouchSmart - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 5
switch your computer back from a wall-mounted unit to desktop unit, instructions are also included for reinstalling the stand on the computer. It read "Additional Safety Information" in the Limited Warranty and Support Guide before installing and connecting your system to the electrical power - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 6
Before removing the stand To avoid injury and equipment damage when opening the HP TouchSmart PC, always complete the following steps in order: 1. Remove any media and external devices (such as any CD, DVD, memory cards, USB devices, or external hard disk drives) from the HP TouchSmart PC. CAUTION: - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 7
2. Insert your finger, or a flathead screwdriver, into the slot on the stand cover to pry it off of the computer stand. 3. Remove the stand cover from the computer stand. Wall-Mounting your HP TouchSmart Removing the computer stand 3 - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 8
4. Use a Phillips screwdriver to tighten the recessed two brake screws (for the rails) on the computer. It should take about 5-10 turns of the screwdriver to secure the screws. Take care not to overtighten the screws. NOTE: The tightened brake screws will hold the VESA adapter plate in the locked - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 9
6. Remove the VESA adapter plate from the bottom of the computer stand. 7. Use a flathead screwdriver to remove the four screws attaching the computer stand to the back of the computer. Wall-Mounting your HP TouchSmart Removing the computer stand 5 - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 10
stand is ever replaced on the computer, the VESA adapter plate must be replaced on the bottom of the computer stand in order to properly support the computer. Follow all the steps in Reinstalling the stand on your HP TouchSmart PC on page 10. 6 Chapter 1 Preparing your HP TouchSmart PC for - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 11
Installing the VESA adapter plate 1. Place the VESA adapter plate over the rails on the back of the computer, matching the cutouts on the each side of the plate with the screw holes and the hooks on the rails. 2. Attach the VESA adapter plate to the back of the computer, using a Phillips screwdriver - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 12
3. Slide the VESA adapter plate upward until it locks into place. You will hear a click when the VESA adapter plate is locked in place. NOTE: If you do not hear the click or the plate does not lock in place, it means the two brake screws were not sufficiently tightened when the computer stand was - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 13
4. Attach the wall-mounting hardware (purchased separately) to the VESA adapter plate, according to the manufacturer's instructions, using either the 100 mm x 100 mm screw holes or the 100 mm x 200 mm screw holes. 5. Mount the computer on the wall. CAUTION: The - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 14
no direct connection to the earth, according to IEC 60950). WARNING! Please read "Additional Safety Information" in the Limited Warranty and Support Guide before installing and connecting your system to the electrical power system. WARNING! The computer is heavy. Take proper precautions when lifting - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 15
with a clean soft cloth. CAUTION: The computer is heavy and may require two people to remove it from the wall. 6. Following the manufacturer's instructions, remove the wall-mounting hardware from the VESA adapter plate on the HP TouchSmart PC. Wall-Mounting your HP TouchSmart Removing the wall - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 16
stand is on the computer, replace the VESA adapter plate on the bottom of the computer stand. This stabilizes the computer stand so that it supports the weight of your HP TouchSmart PC. 1. Use a Phillips screwdriver to remove the four screws from the VESA adapter plate at the back of the - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 17
3. Tilt the base of the computer stand so that you can position it over the rails on the back of the computer, and align the four screw holes. 4. Use a flathead screwdriver to replace the four screws attaching the computer stand to the computer. Wall-Mounting your HP TouchSmart Replacing the - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 18
5. Use a Phillips screwdriver to loosen the brake screws, turning to the left 5-6 times. NOTE: The brake screws are not removable and only need to be loosened to move the computer stand. 6. Grasp the computer stand and move it slightly upward to release the lock. You will hear a click. Then slowly - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 19
the computer stand. CAUTION: Do not skip steps 7 and 8 when replacing the computer stand. The VESA adapter plate is required on the computer stand to support the weight of the computer. Wall-Mounting your HP TouchSmart Replacing the computer stand 15 - HP TouchSmart 610-1150xt | Wall-Mounting your HP TouchSmart User Guide - Page 20
9. Align the stand cover to the computer stand and snap it back into place. Make sure that there are no gaps between the computer stand and the stand cover. 10. Place the HP TouchSmart PC in an upright position. 11. Adjust the vertical position and tilt of the display. 12. Connect the power cord.
Wall-Mounting your HP TouchSmart
User Guide