HP TouchSmart 9100 Maintenance and Service Guide: HP TouchSmart 9100 Business - Page 49

Table 5-4 Computer Setup-Power (continued) S5 Maximum Power Savings Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this system as much as possible in the S5 state. This feature must be disabled if you want to enable Wake on LAN from S5. WOL in S5 Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5 during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in order to enable limited Wake on LAN from S5. Computer Setup-Boot NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 5-5 Computer Setup-Boot Option Description Boot-time Diagnostic Disables/enables POST diagnostic messages display. Screen Esc: Boot Menu Disables/enables POST Esc: Boot Menu message display, F9: Diagnostics Disables/enables POST F9: Diagnostics message display, F10: Setup Disables/enables POST F10: Setup message display, F11: Recovery Disables/enables POST F11: Recovery message display, F12: Boot From LAN Disables/enables POST F12: Boot From LAN message display, (Boot Device Priority) 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device Allows you to specify which device groups will boot first, second, third, and fourth or to disable any of the four: ● CD-ROM Group ● HDD Group ● Floppy Group ● Network Boot Group Floppy Group Boot Priority NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started. Specifies boot device priority within removable devices. CD-ROM Group Boot Priority HDD Group Boot Priority Network Group Boot Priority Specifies boot device priority within CD/DVD drives. Specifies boot device priority within hard drives. Specifies boot device priority within bootable network devices. Computer Setup (F10) Utilities 43