HP Visualize J5000 hp Visualize J5000, J7000 workstations owner's guide (a5991 - Page 74

Removing a Hard Disk Drive

Get HP Visualize J5000 - Workstation PDF manuals and user guides View all HP Visualize J5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

CAUTION Figure 3-2 Hot-Pluggable Hard Disk Drives The Disk Drives Removing a Hard Disk Drive The instructions for removing a disk drive from the J5 Class and J7 Class are printed on the front panel, and are visible when the panel door is opened, as shown in the detail below. If you are removing a hard disk drive while the system is running, you must perform the operations outlined in "The Hot-Plug Procedure" on page 81 before the physical removal of the drive, or data corruption is likely to occur. Removing a Hard Disk Drive The instructions are also printed here for your convenience: 1. Identify the drive to be removed, and make sure it is not currently in use. If the machine is to remain powered up, see the section "The Hot-Plug Procedure" on page 81 for the proper preparations. 2. Push the plastic retaining tab to the right, to release the drive-tray's handle. Pull the handle on the drive to unseat it from its power and data connections. 74 Chapter 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
74
Chapter 3
Hot-Pluggable Hard Disk Drives
The Disk Drives
Removing a Hard Disk Drive
The instructions for removing a disk drive from the J5 Class and J7
Class are printed on the front panel, and are visible when the panel door
is opened, as shown in the detail below.
CAUTION
If you are removing a hard disk drive while the system is running, you
must
perform the operations outlined in “The Hot-Plug Procedure” on
page
81
before
the physical removal of the drive, or data corruption is
likely to occur.
Figure 3-2
Removing a Hard Disk Drive
The instructions are also printed here for your convenience:
1.
Identify the drive to be removed, and make sure it is not currently in
use. If the machine is to remain powered up, see the section “The
Hot-Plug Procedure” on page 81 for the proper preparations.
2.
Push the plastic retaining tab to the right, to release the drive-tray’s
handle. Pull the handle on the drive to unseat it from its power and
data connections.