HP Vs15 HP Pavilion F50, F70 LCD Monitor - (English) User Guide - Page 40

HP f70 Audio System PerformanceSpecifications, hp pavilion f50/f70 LCD Monitor - flat panel

Page 40 highlights

hp pavilion f50/f70 LCD Monitor HP f70 Audio System Performance Specifications HP f70 Audio System Performance Specifications Amplifier Performance Storage Performance Output power per channel > 3 W @ 85dB Crosstalk, 22 kHz better than -50dB bandwidth, 1 kHz, shorted inputs, at maximum gain: Nominal THD below 2 W, 1 < 0.1% (0,1%) kHz, 30 kHz measurement bandwidth: Sensitivity (input voltage to -400 mV rms @ 1 kHz produce full output): Input impedance: 10k Frequency response: 150 Hz-23 kHz, -3 dB @ 230 Hz and 22 kHz Maximum SPL: @ 0.5 m (0,5 m): 99 dB C-weighted (calculated) Idle current draw: 40 mA NOTE: The purpose of this document is to specify the nominal electrical and acoustical performance of the audio system for the HP Pavilion f70 flat panel LCD computer display. 40 English X

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

hp pavilion f50/f70 LCD Monitor
HP f70 Audio System Performance Specifications
40
English
HP f70 Audio System Performance Specifications
NOTE:
The purpose of this document is to specify the nominal
electrical and acoustical performance of the audio system
for the HP Pavilion f70 flat panel LCD computer display.
Amplifier
Performance
Output power per channel
into 8 ohm loads, both
channels driven, 1 kHz, with
12 V
regulated supply:
> 3 W @ <5% THD
Signal-to-Noise ratio,
grounded inputs, maximum
gain, A-weighted, referred
to full output:
> 85dB
Crosstalk, 22 kHz
bandwidth, 1 kHz, shorted
inputs, at maximum gain:
better than
50dB
Nominal THD below 2 W, 1
kHz, 30 kHz measurement
bandwidth:
< 0.1% (0,1%)
Sensitivity (input voltage to
produce full output):
400 mV rms @ 1 kHz
Input impedance:
10k
Storage
Performance
Frequency response:
150 Hz
23 kHz,
3 dB @
230 Hz and 22 kHz
Maximum SPL:
@ 0.5 m (0,5 m): 99 dB
C-weighted (calculated)
Idle current draw:
40 mA