HP Workstation xw4100 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 156

Adaptec SCSI RAID Software Reference Guide container set label To assign a new label to the specified array or to assign a label to an array that has no label, use the container set label command. The following commands have a /label switch that allows you to assign a label to the array when you create it: ■ container create mstripe (a multilevel stripe set) ■ container create mvolume (a multilevel volume set) ■ container create raid5 (a RAID-5 set) ■ container create stripe (a stripe set) ■ container create volume (a volume set) The label you specify with the container set label command and the /label switch associated with the previously listed container create commands is not the label that displays in Windows Explorer. The label displayed by Windows Explorer comes from the label specified with the container format command. Syntax container set label {container} {string} Parameters {container} Specifies the ID number (0 to 63) of the array to which you want to assign a label. {string} Specifies the label you want to assign to the array. The label is a string of up to sixteen characters. Examples Before assigning a label to a specific array, use the container list command to obtain information about any existing arrays. As the following example shows, there is an array 0 (a volume set) on this controller with no label assigned to it (as evidenced by no label in the Num Label column): 5-108