HP mv5150 HP MV2120, MV5020, MV5140, MV5150 Media Vault - User's Guide - Page 162
Ensure that you have connected the HP Media Vault to the, correct network adapter
UPC - 883585550029
View all HP mv5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Check all cords, cables, and outlets 1 Make sure all devices on your network are correctly installed and the cables are connected to the proper ports. 2 Make sure you press in the power button. 3 Make sure your router has power. 4 Restart your router (or unplug and plug it back in). 5 Restart all the devices on your network, including your computers and the HP Media Vault. 6 If you're using your own Ethernet cable, try using the Ethernet cable that came with the HP Media Vault. Check the LED lights on the front of the HP Media Vault • The Power Indicator LED light should be blue. • The Health Indicator LED should blue. • The Network Activity Indicator LED should blue. Table 5: Health Code Indicators Code 1-blue (short), 1-red (long) Boot image missing 1-blue (short), 2-red (long) Failed Recovery 2-blue (short), 1-red (long) Unable to obtain DHCP address Action Run firmware repair utility on PC Restart the HP Media Vault and run firmware repair utility on PC Check router, If using a static IP address, reconfigure the HO Media Vault, for more information see You prefer to set static IP Addresses on page 12-168 Ensure that you have connected the HP Media Vault to the correct network adapter Do you have multiple network adapters connected to different physical networks? If so, enable the network adapter on the network that you have attached the HP Media Vault, and disable the other network adapters. You 12- Version 154