HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 65
Installing a Half-Height Expansion Card, - pc
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Installing a Half-Height Expansion Card The computer system board has a PCI Express x1 expansion slot, a PCI Express x16 expansion slot, and a riser card expansion slot. The riser card expansion slot is populated with a riser card specifically designed for this product. You can install expansion cards into the PCI Express x1 and PCI Express x16 slots as needed. NOTE: The PCI Express slots support only low profile cards. You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot. Figure 7-10 System Board Expansion Slot Locations Table 7-2 System Board Expansion Slot Locations No. Expansion Slot 1 Riser Card (populated) 2 PCI Express x16 3 PCI Express x1 CAUTION: The Riser Card expansion slot is specifically designed for either of the two riser cards designed for this product. DO NOT attempt to plug any other type of card into this slot. NOTE: The following sections provide instructions for installing a Powered USB expansion card. However, the procedure is basically the same for installing any PCI Express expansion card into a PCI Express x1 expansion slot or PC Express x16 expansion slot. Expansion Cards 55