HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 78
Raising the Power Supply,
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3. Rotate the power supply all the way back to access the full-height expansion card retention latch. NOTE: If you are using a PS/2 mouse and/or PS/2 keyboard, make sure they are unplugged from the rear of the computer so that the connectors do not block the power supply from rotating all the way back. Figure 7-26 Raising the Power Supply 4. Pull back the green tab on the full-height expansion card retention latch to open the latch. Figure 7-27 Opening the Full-Height Slot Cover Retention Latch 68 Chapter 7 Removal and Replacement Procedures
3.
Rotate the power supply all the way back to access the full-height expansion card retention
latch.
NOTE:
If you are using a PS/2 mouse and/or PS/2 keyboard, make sure they are unplugged
from the rear of the computer so that the connectors do not block the power supply from rotating
all the way back.
Figure 7-26
Raising the Power Supply
4.
Pull back the green tab on the full-height expansion card retention latch to open the latch.
Figure 7-27
Opening the Full-Height Slot Cover Retention Latch
68
Chapter 7
Removal and Replacement Procedures