HP rp5800 Maintenance & Service Guide HP rp5800 Retail System - Page 85
System Board Drive Connections, CAUTION,
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Table 7-7 Extra Guide Screw Locations No. Guide Screw Device 1 Black M3 Metric Screws Optical Drive 2 Silver 6-32 Standard Screws Secondary Hard Drive There are at total of five extra silver 6-32 standard screws. Four are used as guide screws for a secondary hard drive. The fifth is used for bezel security (see Front Bezel Security on page 44 for more information). CAUTION: To prevent loss of work and damage to the computer or drive: If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode. Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. For more information about preventing electrostatic damage, refer to Electrostatic Discharge Information on page 34 Handle a drive carefully; do not drop it. Do not use excessive force when inserting a drive. Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers. If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label the package "Fragile: Handle With Care." System Board Drive Connections Refer to the following illustration and table to identify the system board drive connectors. Figure 7-37 System Board Drive Connections Drives 75