HP s3720y Upgrading and Servicing Guide - Page 14

IMPORTANT, Remove the screw from the optical disc drive side. - sound

Page 14 highlights

4 Make a note of each cable and plug orientation attached to the back of the optical disc drive before removing the cables. 5 Disconnect the power cable and then the data cable from the back of the optical disc drive. Pull the tab on the data cable. Use a gentle rocking motion on the power cable. NOTE: The SATA data cable may include a latch. Press the latch, and pull the plug to remove the data cable from the drive. CAUTION: Pull the connector by the handle only. 6 Disconnect the sound cable, if present. 7 Remove the screw from the optical disc drive side. 8 Pull the latch away from the drive, and push the drive through the front of the computer. IMPORTANT: Do not tilt the drive during removal. 10 Upgrading and Servicing Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

10
Upgrading and Servicing Guide
4
Make a note of each cable and
plug orientation attached to the
back of the optical disc drive
before removing the cables.
5
Disconnect the power cable
and then the data cable from
the back of the optical disc
drive. Pull the tab on the data
cable. Use a gentle rocking
motion on the power cable.
6
Disconnect the sound cable, if present.
7
Remove the screw from the optical disc drive side.
8
Pull the latch away from the drive, and push the drive through the front of the
computer.
NOTE:
The SATA data cable may include a latch. Press the latch, and pull the plug to
remove the data cable from the drive.
CAUTION: Pull the connector by the handle only.
IMPORTANT:
Do not tilt the drive during removal.