HP t1000 T1000 Series Terminal Emulation Guide - Page 44
Printer Setup..., Not available in WBT mode
View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Startup Options... NOTE: (Not available in WBT mode) The following dialog box displays when this option is selected. This enables you specify whether the emulator is to make a host connection using the default connection template, display the New Connection dialog box, or display the Open Session dialog box when it is loaded (but not when it is reset). Refer to the relevant descriptions earlier in this section for information on these dialog boxes. Printer Setup... This displays a dialog box that enables you to produce a hardcopy of data displayed on the screen in a particular format. The Text option is selected by default and the printer resolution and scaling options are not accessible. Clicking the OK button with Text selected causes a fast print of the screen using ASCII text codes, therefore any graphics displayed in the client area are not printed. Selecting Graphics prints all the data in the client area, both graphics and text, when the OK button is clicked. The hardcopy output is an almost exact representation of the client area. Note that a graphics print takes a lot longer than a text print. The Print Direct To Port and Printer Port options enable you to direct print data to a specific port. When Print Direct To Port is disabled (default), print data is handled by the printer resources on the PC. The Use Printer Resolution option is available when Graphics print is selected. This forces a dot for dot print of the screen on the printer and generally produces a small print, 4-6 Setup Menus