HP t1000 T1000 Series Terminal Emulation Guide - Page 57
Serial Settings, Baud Rate, Parity
View all HP t1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Serial Settings When the terminal is not in WBT mode, this dialog box is displayed by selecting Serial in the Settings menu, or by clicking the Configure... button in the New Connection dialog box when the connection type is set to Serial. Note that the port for serial communications is selected via the New Connection dialog box that is displayed from the File menu. Baud Rate Factory default: 9600 This specifies the transmit and receive baud rates for the port selected for host communications. Parity Factory default: None This option specifies the parity mode for each transmitted character. If the number of Data Bits is 8, set this option to None. Selecting Odd causes an eighth bit to be added with a value of 1 if the previous 7 bits add up to an even number, and 0 if the previous 7 bits add up to an odd number. Selecting Even causes an eighth bit to be added with a value of 1 if the previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity sets every eighth bit to 1 and Space parity every bit to 0. Setup Menus 4-19