Hitachi CP-A221N User Manual

Hitachi CP-A221N Manual

Get Hitachi CP-A221N PDF manuals and user guides View all Hitachi CP-A221N manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP-A221N manual content summary:

  • Hitachi CP-A221N | User Manual - Page 1
    Projector CP-A221N/CP-A301N/CP-AW251N (Type nos. CP-A221N, CP-A221NM, CP-A301N, CP-A301NM, CP-AW251N, CP-AW251NM) User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety
  • Hitachi CP-A221N | User Manual - Page 2
    on, Power on/off 18 Auto power off, Usb type b, Lamp time, Operating 20 Filter time, My button, My source, Adjusting the volume 20 Service Temporarily muting the sound. . . . . . 20 NETWORK menu 65 Selecting an input signal 20 Setup, Projector name, My image, Searching an input signal 22 Amx
  • Hitachi CP-A221N | User Manual - Page 3
    realizes ultra short distance projection,which gives you more various way of use. ü The motorized lens door offers you very simple use of the projector. ü T he double layer filter system is expected to function longer and offers you less maintenance frequency. ü The HDMI port can support various
  • Hitachi CP-A221N | User Manual - Page 4
    an injury. ►Never look into the projection lens or mirror while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Do not use the security bar and slot to prevent the projector from falling down, since it is not designed for it. CAUTION ►Maintain normal
  • Hitachi CP-A221N | User Manual - Page 5
    ) (3) POWER indicator (&18, 101, 102) (4) TEMP indicator (&101, 102) (5) LAMP indicator (&101, 102) Buttons (6) FOCUS +/- buttons Cursor ▲/▼ buttons when a menu is displayed (&28). The buttons on the projector work only as the cursor buttons while the template is displayed (&52). Ports
  • Hitachi CP-A221N | User Manual - Page 6
    Introduction Remote control (1) VIDEO button (&21) (2) COMPUTER button (&21) (3) SEARCH button (&22) (4) button (&28, 29) (26 cursor buttons (&28) (27) ENTER button (&28, 29) (28) ESC button (&28) (29) RESET button (&28) (30) Battery cover (&16) (2) (1) (6) (5) (16) (8) (9) (19) (17) (20) (21)
  • Hitachi CP-A221N | User Manual - Page 7
    dealer or service personnel. • The projected image position and/or focus may change during warm-up (approx. 30 minutes after the lamp is turned on) or when the ambient conditions change. Readjust the image position and/or focus as necessary. • Since the projector features an ultra short throw, be
  • Hitachi CP-A221N | User Manual - Page 8
    , and leave installing and removing the projector with the mounting accessories to the service personnel. • Read and keep the user's manual of the mounting accessories used. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire
  • Hitachi CP-A221N | User Manual - Page 9
    the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and . After making sure that the device and projector are turned off, connect them following the instructions below. WARNING ►Use only the appropriate accessories
  • Hitachi CP-A221N | User Manual - Page 10
    is attempted. - Please use the standard drivers in your computer as this projector is a Plug-andPlay monitor. • When AUTO is selected for the COMPUTER USB TYPE B port as a picture input port from the computer, or use the remote control as a simple mouse and keyboard of the computer. (17, 55). VCR/
  • Hitachi CP-A221N | User Manual - Page 11
    supported by this projector. - Although the projector can display signals with resolution up to UXGA (1600X1200), the signal will be converted to the projector the computer's manual for the setting. • Depending on the input signal, the automatic adjustment function of this projector may take some
  • Hitachi CP-A221N | User Manual - Page 12
    adjustable with the VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector. (&20) Even when the sound of projector is set to mute mode by the away from the speaker. • This projector doesn't support plug-in power for the microphone. 12 (continued on next page)
  • Hitachi CP-A221N | User Manual - Page 13
    your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port of the external device to communicate as a network terminal. See the User's Manual - Network Guide for details of the network functions. Access point Computer LAN RS-232C USB
  • Hitachi CP-A221N | User Manual - Page 14
    projector. 2. Firmly plug the power cord's plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool.
  • Hitachi CP-A221N | User Manual - Page 15
    parts as shown in figure, and assemble the cable cover. 3 3 1 1 2 2 3. Insert the three knobs on the cable cover into the three holes on the projector as shown in the figure. Pass the cables through the holes on the bottom of the cable cover. 1 knobs 1 3 2 2 3 CAUTION ► Be careful not
  • Hitachi CP-A221N | User Manual - Page 16
    , short circuit projector. • The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights
  • Hitachi CP-A221N | User Manual - Page 17
    REMOTE FREQ. in the SERVICE item of the OPTION menu (61) of the projector to be controlled should be set to the same mode as the remote control. ESC RESET Using as a simple PC mouse & keyboard The accessory remote 's manuals before connecting this product to the computer. ESC (5) RESET (6)
  • Hitachi CP-A221N | User Manual - Page 18
    RESET the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Be careful not to pinch your finger with the lens door, to prevent an injury. ►Do not place the projector accessories. ►Do not stand under the projector mounted on the wall or ceiling, when its
  • Hitachi CP-A221N | User Manual - Page 19
    on the projector or the remote control. The mount installation. Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete (101). Do not turn the projector on for about 10 minutes or more after turning it off. Also, do not turn the projector off shortly
  • Hitachi CP-A221N | User Manual - Page 20
    An option other than is selected for STANDBY in the AUDIO SOURCE ESC RESET item of the AUDIO menu (46). - NORMAL is selected in the remote control, in synchronization with the volume of the projector (12). Temporarily muting the sound MUTE button 1. Press MUTE button on the remote
  • Hitachi CP-A221N | User Manual - Page 21
    ON FREEZE UP ＋ OFF DOWN ー KEYSTONE MY BUTTON 1 2 MUTE - FOCUS + POSITION - D-ZOOM + MENU ENTER ESC RESET 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. HDMI  S-VIDEO VIDEO ● While ON
  • Hitachi CP-A221N | User Manual - Page 22
    1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio RESET 4:3  16:9  16:10  14:9  NATIVE  F or an input signal from the LAN, USB TYPE A or USB TYPE B port, or if there is no signal CP-A221N, CP-A301N: 4:3 (fixed) CP
  • Hitachi CP-A221N | User Manual - Page 23
    projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually the projector, it will recommend keep and reuse the spacers. Adjusting the zoom and focus Press the D-ZOOM + or D-ZOOM - button on the remote control + button ESC RESET 23
  • Hitachi CP-A221N | User Manual - Page 24
    projector. ● The buttons on the projector work only as the cursor buttons while the template is displayed (52). ● FOCUS +/- button on the projector button ESC RESET Using the automatic adjustment feature 1. Press AUTO button on the remote control. SERVICE item in the OPTION menu (59). 24
  • Hitachi CP-A221N | User Manual - Page 25
    CP-A221N, CP-A301N) ● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 320 (full screen). (CP-AW251N) Correcting the keystone distortions KEYSTONE button 1. Press KEYSTONE button on the remote - D-ZOOM + MENU ENTER ESC RESET ● The adjustable range of this function
  • Hitachi CP-A221N | User Manual - Page 26
    remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector times  4 times  1 time ESC RESET  F or video signals, s-video signals supported is input. - There is no input signal. 26
  • Hitachi CP-A221N | User Manual - Page 27
    exits from the FREEZE mode when someENTcER ontrol buttons are pressed. ESC RESET ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. ● Images might appear degraded when
  • Hitachi CP-A221N | User Manual - Page 28
    using the same mOeNthoFdREsEZ.E WUhP ile th＋ e projector is displaying any menu, the MENU button on the FOCUS + POSITION - D-ZOOM + MENU ENTER ESC RESET ESC button RESET button 1. To start the MENU, press the MENU button instructed in the OSD to operate the item. (continued on next page) 28
  • Hitachi CP-A221N | User Manual - Page 29
    port is selected, or when a certain input signal is displayed. ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, VOLUME) cannot be reset. ● In the ADVANCED MENU, when you want to return to the previous display
  • Hitachi CP-A221N | User Manual - Page 30
    EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT D-ZOOM KEYSTONE KEYSTONE PERFECT FIT Description Using the ◄/► buttons switches the mode for aspect
  • Hitachi CP-A221N | User Manual - Page 31
    menu for the PICTURE MODE is "CUSTOM". Please refer to the GAMMA and COLOR TEMP (32, 33) items in PICTURE menu. • Lines or other noise might appear item in SETUP menu (45). RESET FILTER TIME Performing this item resets all of the EASY MENU items except the FILTER TIME and LANGUAGE. A dialog is
  • Hitachi CP-A221N | User Manual - Page 32
    . Then perform it according to the following table. Item BRIGHTNESS CONTRAST Description Using the ◄/► buttons adjusts the brightness. Dark ó Light Using the ◄/► buttons adjusts the contrast. Weak ó Strong Using the ▲/▼ buttons switches the gamma mode. 1 DEFAULT  1 CUSTOM  2 DEFAULT  2 CUSTOM
  • Hitachi CP-A221N | User Manual - Page 33
    5 CUSTOM  5 Hi-BRIGHT-2  4 CUSTOM  4 Hi-BRIGHT-1 COLOR TEMP To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. TINT Using the ◄/► buttons adjusts the
  • Hitachi CP-A221N | User Manual - Page 34
    The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER
  • Hitachi CP-A221N | User Manual - Page 35
    from the LAN, USB TYPE A or USB TYPE B port, or if there is no signal CP-A221N, CP-A301N: 4:3 (fixed) CP-AW251N: 16:10 (fixed) • The NORMAL mode keeps the original aspect ratio of the signal is set to AUTO, and the projector recognizes that it receives video signals. (continued on next page) 35
  • Hitachi CP-A221N | User Manual - Page 36
    the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION is selected will reset the V POSITION to the default setting. • When this function is performed on a video signal or
  • Hitachi CP-A221N | User Manual - Page 37
    the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation. • Images might appear degraded when this function is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (59). 37
  • Hitachi CP-A221N | User Manual - Page 38
    INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item Description Using the ▲/▼ buttons
  • Hitachi CP-A221N | User Manual - Page 39
    INPUT menu Item VIDEO FORMAT Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This item is performed only
  • Hitachi CP-A221N | User Manual - Page 40
    INPUT menu Item COMPUTER IN FRAME LOCK Description The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) U se the ◄/► buttons to select the computer input signal type. AUTO ó SYNC ON G OFF • Selecting the
  • Hitachi CP-A221N | User Manual - Page 41
    COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ and vertical (VERT) resolutions using CUSTOM ↓ the buttons. This function may not support all resolutions. (5) Move the cursor to OK on screen and press the
  • Hitachi CP-A221N | User Manual - Page 42
    . TOP ó MID ó BOTTOM The PICTURE POSITION is not changed if any of the following cases apply. • The ASPECT is set to 4:3. PICTURE POSITION (CP-A221N, CP-A301N) • The input signal has an aspect ratio of 4:3 or vertically larger than 4:3, while the ASPECT is set to NORMAL. • Vertical size of the
  • Hitachi CP-A221N | User Manual - Page 43
    SETUP menu Item PICT. POSIT. H (CP-AW251N) KEYSTONE KEYSTONE Description Using the ▲/▼ cursor buttons selects the horizontal picture position. LEFT ó MID ó RIGHT The PICT. POSIT. H is not changed if any of
  • Hitachi CP-A221N | User Manual - Page 44
    , keystone adjustment feature is unavailable. To correct the keystone distortion, reset the adjustment of all the corners and sides. • The adjustable AUTO ECO MODE. ON ó OFF AUTO ECO MODE • When ON is selected, the projector will always be set to Eco mode at start-up regardless of the ECO MODE (
  • Hitachi CP-A221N | User Manual - Page 45
    NORMAL ó ECO • When the ECO is selected, acoustic noise and screen brightness are reduced. • When AUTO ECO MODE (44) is set to ON, the projector will always be set to Eco mode at start-up regardless this setting. Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT
  • Hitachi CP-A221N | User Manual - Page 46
    projected, the audio signal from the input port selected in step (2) is output to both the AUDIO OUT port and built-in speaker of this projector. However, the built-in speaker does not work when SPEAKER is set to OFF. (1) C hoose a picture input port using the ▲/▼ buttons. Choose STANDBY to select
  • Hitachi CP-A221N | User Manual - Page 47
    AUDIO menu Item HDMI AUDIO MIC LEVEL MIC VOLUME Description Using the ▲/▼ buttons switches the mode for the HDMITM audio. Check each of the two modes provided and select the suitable one for your HDMITM audio device. 1 ó 2 Using the ▲/▼ buttons switches the input level to match that of the
  • Hitachi CP-A221N | User Manual - Page 48
    or INPUT button to save the language setting. Using the buttons adjusts the menu position. To quit the operation, press the MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode for the blank screen. The blank screen is a screen for
  • Hitachi CP-A221N | User Manual - Page 49
    or INPUT button when the image is displayed. The image will freeze and the frame for capturing will appear. To stop performing, press the RESET button on the remote control. 2. Using the buttons adjusts the frame position. Please move the frame to the position of the image which you want to use
  • Hitachi CP-A221N | User Manual - Page 50
    SCREEN menu Item MyScreen Lock MESSAGE Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the
  • Hitachi CP-A221N | User Manual - Page 51
    SCREEN menu Item SOURCE NAME Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE
  • Hitachi CP-A221N | User Manual - Page 52
    button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time. Also if you move the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears. (continued on next page) 52
  • Hitachi CP-A221N | User Manual - Page 53
    required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not work properly, depending is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C.
  • Hitachi CP-A221N | User Manual - Page 54
    or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1  COMPUTER IN2  LAN
  • Hitachi CP-A221N | User Manual - Page 55
    turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO POWER OFF When the time is set to 0, the projector is not reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote control buttons is pressed or one of
  • Hitachi CP-A221N | User Manual - Page 56
    OPTION menu Item LAMP TIME FILTER TIME Description The lamp time is the usage time of the lamp, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog. To reset the lamp time, select the
  • Hitachi CP-A221N | User Manual - Page 57
    is to assign one of the following functions to MY BUTTON 1/2 on the remote control (6). (1)Use the ▲/▼ buttons on the MY BUTTON menu to select a text displayed on the screen on/off (Messenger Function in the User's Manual - Network Guide). When there is no transferred text data to display, the
  • Hitachi CP-A221N | User Manual - Page 58
    MODE: Changes the PICTURE MODE (31). • F ILTER RESET: Displays the filter time reset confirmation dialogue (56). • TEMPLATE: Makes the template pattern to be selected with pressing the MY SOURCE/DOC.CAMERA button on the remote control. You can use this function not only for document cameras but
  • Hitachi CP-A221N | User Manual - Page 59
    Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. If the projector is used at an altitude
  • Hitachi CP-A221N | User Manual - Page 60
    the LENS DOOR CLOSE function to temporarily close the lens door when LENS DOOR LOCK is set to ON. Note that the lamp will be turned off when the lens door is closed. Press the STANDBY/ON button on the projector or the remote control to open the lens door and start the
  • Hitachi CP-A221N | User Manual - Page 61
    SERVICE (continued) OPTION menu Description REMOTE FREQ. (1)Use the ▲/▼ button to change the projector's remote sensor frequency setting (4, 17). 1:NORMAL ó 2:HIGH (2)Use the ◄/► button to change the projector's remote , refer to the User's Manual - Network Guide. (continued on next page) 61
  • Hitachi CP-A221N | User Manual - Page 62
    it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands (Network Bridge Function in the User's Manual - Network Guide) OFF: Select this mode to receive RS-232C commands using the CONTROL port. • OFF
  • Hitachi CP-A221N | User Manual - Page 63
    through the CONTROL port. OFF ó 1s ó 2s ó 3s SERVICE (continued) OFF: Select this mode if it is not required to check the responses from the device that the projector COMMUNICATION (continued) sends data to. In this mode, the projector can send out data from the computer continuously. 1s /2s
  • Hitachi CP-A221N | User Manual - Page 64
    "INPUT_INFORMATION". It shows the information about the current input. SERVICE (continued) • The "FRAME LOCK" message on the dialog together with the input information in the INPUT_ INFORMATION box (77). FACTORY RESET Selecting OK using the ► button performs this function. By this function,
  • Hitachi CP-A221N | User Manual - Page 65
    settings on this projector may cause trouble on the network projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Guide
  • Hitachi CP-A221N | User Manual - Page 66
    . Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings in the User's Manual - Network Guide) (continued on next page) 66
  • Hitachi CP-A221N | User Manual - Page 67
    NAME will be displayed on the first 3 lines. Particular projector name is pre-assigned by default. Use the buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time. Also if
  • Hitachi CP-A221N | User Manual - Page 68
    To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User's manual - Network Guide) and the ► or ENTER button
  • Hitachi CP-A221N | User Manual - Page 69
    a computer to the Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is use "LiveViewer". For details, see the section Presenter mode in the User's Manual - Network Guide. MULTI PC MODE If you set one or more computers to the
  • Hitachi CP-A221N | User Manual - Page 70
    details on how to switch the display mode to Multi PC mode on your computer, see the section Switching the display mode in the User's Manual - Network Guide. • The Presenter mode setting of the selected computer becomes valid when the display mode is changed to Single PC mode. Also, the Presenter
  • Hitachi CP-A221N | User Manual - Page 71
    the network connection method in the User's manual - Network Guide. • Only the first 16 characters of the projector name are displayed. • When the initializes the network functions. Choose the RESTART EXECUTE using the button ►. SERVICE Then use the button ► to execute. Network will be once cut
  • Hitachi CP-A221N | User Manual - Page 72
    password (1). While the ENTER PASSWORD box is displayed, press and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. (2). The 10 digit Inquiring Code will be displayed. Contact your dealer
  • Hitachi CP-A221N | User Manual - Page 73
    of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set . Your password will be sent after your user registration information is confirmed. (continued on next page) 73
  • Hitachi CP-A221N | User Manual - Page 74
    press and hold the RESET button for 3 seconds or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. The 10 digit the projector will turn off. 3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN code will be sent after your user registration
  • Hitachi CP-A221N | User Manual - Page 75
    projector will not display the input signal. • To display the signal again, set this function OFF. • After about 5 minutes of displaying the TRANSITION DETECTOR ON alarm, the lamp remote control or the ► button on the projector user registration information is confirmed. (continued on next page) 75
  • Hitachi CP-A221N | User Manual - Page 76
    make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off Your password will be sent after your user registration information is confirmed. (continued on next page) 76
  • Hitachi CP-A221N | User Manual - Page 77
    on the START UP screen and the INPUT_ INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the same time. Also
  • Hitachi CP-A221N | User Manual - Page 78
    Presentation tools Presentation tools The projector has the following two convenient tools that enable on-screen your computer. - Thumbnail mode (79) - Full Screen mode (83) - Slideshow mode (84) [Supported storage media] • USB memory (USB memory type, USB hard disk and USB card reader type) NOTE
  • Hitachi CP-A221N | User Manual - Page 79
    Presentation tools PC-LESS Presentation (continued) Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen. If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select some
  • Hitachi CP-A221N | User Manual - Page 80
    or keypad or a web browser software. The following functions can be supported while the Thumbnail is displayed. The remote control PAGE UP PAGE DOWN Button operation The keypad on Web Remote in web the projector browser software. - PAGE UP PAGE DOWN ENTER INPUT ENTER Functions
  • Hitachi CP-A221N | User Manual - Page 81
    Slideshow. Selects the Slideshow mode. Switches the input port. Displays the menu. Be sure to use this function before removing USB storage device from the projector. After that, the projector will not recognize a USB storage device until you insert it again into the USB TYPE A input port. 81
  • Hitachi CP-A221N | User Manual - Page 82
    Presentation (continued) NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in the Thumbnail. This file seems to be broken or not supported format. A file that cannot be displayed on the thumbnail screen is indicated by a file
  • Hitachi CP-A221N | User Manual - Page 83
    button on the keypad, or click [ENTER] on the Web Remote Control. Full screen display The following functions can be supported in the Full Screen mode. Button operation The remote control The keypad on the projector Web Remote in web browser software. ▼ ► or PAGE DOWN ▼ or ► ▼ ► or PAGE
  • Hitachi CP-A221N | User Manual - Page 84
    mode and press the ENTER button on the remote control or INPUT button on the projector. The following operations can be accessible while the Slideshow is displayed. The remote control ENTER Button operation The keypad on the projector Web Remote in web browser software. INPUT ENTER Functions
  • Hitachi CP-A221N | User Manual - Page 85
    4) STOP : Set the end number of the Slideshow. 5) INTERVAL : Set the interval time of the Slideshow. It is not recommend to set the interval time very short something like several seconds, because it may take more than several seconds to read and display an image file if it is stored in very
  • Hitachi CP-A221N | User Manual - Page 86
    Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow. The playlist file name is "playlist.txt" and it can be edited on a computer. It is created in the folder that
  • Hitachi CP-A221N | User Manual - Page 87
    B port on the projector using a USB cable, the projector will be recognized as a CD-ROM drive on your computer. Then, the the latest version at Hitachi Web site. http://www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com Follow the instructions that can be obtained at
  • Hitachi CP-A221N | User Manual - Page 88
    computer by selecting "Quit" on the menu. NOTE • The "LiveViewer" (refer to the User's Manual - Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB cable while the "LiveViewer" is running, the following message will be
  • Hitachi CP-A221N | User Manual - Page 89
    the button is clicked is remained on the screen. You can revise the image data on your computer without showing it on the projector's screen.  Option button The Options window is displayed.  Minimize button The Floating menu is closed, and the icon reappears in the Windows notification
  • Hitachi CP-A221N | User Manual - Page 90
    for USB" captures screenshots in JPEG data and sends them to the projector. The "LiveViewer Lite for USB" has two options that have different speed may be faster. CP-A221N, CP-A301N: 1024 x 768 (XGA) CP-AW251N: 1280 x 800 (WXGA) If your computer does not support the display resolution specified
  • Hitachi CP-A221N | User Manual - Page 91
    USB If you want to display LiveViewer application window to the screen, please check the box. NOTE • The annotation layer may not display on the projector image when this option is OFF. About The version information of the "LiveViewer Lite for USB". 91
  • Hitachi CP-A221N | User Manual - Page 92
    in place. 6. While putting the interlocking parts of the lamp cover and the projector together, slide the lamp cover back in place. Then firmly fasten the screw of the lamp cover. 7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu. (1) Press the MENU button
  • Hitachi CP-A221N | User Manual - Page 93
    are electrical problems elsewhere besides the lamp. If this happens, consult your local dealer or a service representative. • Handle with care: jolting or scratching could cause the lamp bulb to burst during use. • Using the lamp for long periods of time, could cause it dark, not to light up or
  • Hitachi CP-A221N | User Manual - Page 94
    dealer and tell the following type number. Type number : UX37191 (Filter set) When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the
  • Hitachi CP-A221N | User Manual - Page 95
    soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about the air
  • Hitachi CP-A221N | User Manual - Page 96
    HITACHI MAXELL or HITACHI MAXELL ENERGY, part number CR2032 or CR2032H. 1.  Turn the projector off, and unplug the power cord. Allow the projector lightly on the battery since it may pop out of the holder. 5. Replace the battery with a new HITACHI MAXELL or HITACHI User's Manual - Network Guide.
  • Hitachi CP-A221N | User Manual - Page 97
    will light in manually, it may not shut properly. • The lens door may not close when the LENS DOOR LOCK function of the SERVICE SERVICE item in the OPTION menu (60). WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector
  • Hitachi CP-A221N | User Manual - Page 98
    the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the projector is cool adequately, lightly wipe with gauze
  • Hitachi CP-A221N | User Manual - Page 99
    to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks User's Manual - Network Guide) The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs
  • Hitachi CP-A221N | User Manual - Page 100
    immediately turn the power off, and clean or change the air filter referring to the "Cleaning and replacing the air filter" section of this manual. After you have cleaned or changed the air filter, please be sure to reset the filter timer (56, 95). The button operation is not available. 100
  • Hitachi CP-A221N | User Manual - Page 101
    Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state.
  • Hitachi CP-A221N | User Manual - Page 102
    Troubleshooting Regarding the indicator lamps (continued) POWER indicator Blinking In Red or Lighting In Red LAMP TEMP indicator indicator Description Turned off Lighting In Red There is a possibility that the interior portion has become heated. Please turn the power off, and allow the
  • Hitachi CP-A221N | User Manual - Page 103
    Troubleshooting Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE item in OPTION menu (64) can reset all settings (except settings such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and NETWORK) to the factory default.
  • Hitachi CP-A221N | User Manual - Page 104
    Troubleshooting play monitor. The BLANK screen is displayed. Press BLANK button on the remote control. The USB TYPE B port is selected as the picture input to the port. Otherwise select other port for picture input. The projector does not recognize the USB storage device inserted into USB TYPE A port
  • Hitachi CP-A221N | User Manual - Page 105
    Troubleshooting COLOR TEMP, lamp. Either the focus and/or horizontal phase settings are not properly adjusted. Adjust the focus using the FOCUS button, and/or H PHASE using the menu function. The lens is dirty or misty. Clean the lens referring to the section "Caring for the lens". When the projector
  • Hitachi CP-A221N | User Manual - Page 106
    Troubleshooting TYPE item in the 62 OPTION - SERVICE - COMMUNICATION menu. Network does The SAVING loop may have an adverse effect on the projector as well as the other network devices. Check which the Please refer to the Microsoft® Help and Support home - "LiveViewer" was page on how to
  • Hitachi CP-A221N | User Manual - Page 107
    Specifications Specifications Please see the Specifications in the User's Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
1
Projector
CP-A221N/CP-A301N/CP-AW251N
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “
Safety Guide
” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac
®
is a registered trademark of Apple Inc.
• Windows
®
, DirectDraw
®
and Direct3D
®
are registered trademarks of Microsoft Corporation
in the U.S. and/or other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• Trademark PJLink is a trademark applied for trademark rights
in Japan, the United States of America and other countries and
areas.
• Blu-ray Disc
TM
and Blu-ray
TM
are trademarks of Blu-ray Disc Association.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.
(Type nos. CP-A221N, CP-A221NM, CP-A301N, CP-A301NM, CP-AW251N, CP-AW251NM)