Hitachi CP-A221N User Manual - Page 33

PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH  1 CUSTOM  2 MID  2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM 5 CUSTOM  5 Hi-BRIGHT-2  4 CUSTOM  4 Hi-BRIGHT-1 COLOR TEMP To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode. OFFSET adjustments change the color intensity on the whole tones of the test pattern. GAIN adjustments mainly affect color intensity on the brighter tones of the test pattern. Choose an item using the ◄/► buttons, and adjust the level using the ▲/▼ buttons. You can display a test pattern for checking the effect of your adjustment by pressing the ENTER button. Each time you press the ENTER button, the pattern changes as below. No pattern ð Gray scale of 9 steps Ramp  Gray scale of 15 steps • Lines or other noise might appear on the screen when this function is operated, but it is not a malfunction. COLOR Using the ◄/► buttons adjusts the strength of whole color. Weak ó Strong • This item can be selected only for a video, s-video and component video signal. • For an HDMITM signal, this item can also be selected if either (1) or (2) applies. (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. TINT Using the ◄/► buttons adjusts the tint. Reddish ó Greenish • This item can be selected only for a video, s-video and component video signal. • For an HDMITM signal, this item can also be selected if either (1) or (2) applies. (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. (continued on next page) 33