Hitachi CP-A221N User Manual - Page 23

Operating Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments. Front foot Rear foot 2.3~4.3° Front foot Spacer (Large) Spacer Rear foot -1~1° Spacer (Small) WARNING ►Keep the spacers away from children and pets. Be careful not to let them swallow the spacers. If swallowed consult a physician immediately for emergency treatment. NOTE • The adjustment angle can be adjusted up to plus or minus 1° each of FRONT and REAR foot. • After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer. Install Large on the Front foot and Small on the Rear foot of the spacer. If change the setting place of the projector, it will recommend keep and reuse the spacers. Adjusting the zoom and focus Press the D-ZOOM + or D-ZOOM - button on the remote control to display D-ZOOM dialog on screen. Use the D-ZOOM + and D-ZOOM - buttons to adjust the picture size. To finish the operation, do not touch these buttons for a few seconds until the dialog is disappeared. ● If you want to expand a part of the image, use the magnify function (26). D-ZOOM - button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE VOLUME ON FREEZE UP ＋ OFF DOWN ー KEYSTONE MY BUTTON 1 2 MUTE - FOCUS + POSITION - D-ZOOM + MENU ENTER D-ZOOM + button ESC RESET 23