Hitachi CP-A221N User Manual - Page 26

Operating Using the magnify feature 1. Press the MAGNIFY ON button on the remote control. The picture will be magnified, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is pressed for the first time after the projector is turned on, the picture will be zoomed by 1.5 times. On the dialog, triangle marks to show each direction will be displayed. MAGNIFY ON/OFF button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE VOLUME ON FREEZE UP ＋ OFF DOWN ー 2. The display magnification of the projector switches in order with every press of the MAGNIFY ON button. KEYSTONE MY BUTTON 1 2 MUTE - FOCUS + - D-ZOOM + POSITION MENU  F or computer signals, HDMITM (RGB) signals, input signals from the LAN or USB TYPE B port ENTER 1.5 times  2 times  3 times  4 times  1 time ESC RESET  F or video signals, s-video signals, component video signals or HDMITM (Component) signals 1.5 times  2 times  1 time 3. While the triangles are displayed on the dialog, use the cursor buttons to shift the magnifying area. 4. Press the MAGNIFY OFF button on the remote control to exit magnification. ● The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared. ● The magnification is automatically disabled when the displaying signal or its display condition is changed. ● While the magnification is active, the keystone distortion condition may vary. It will be restored when the magnification is disabled. ● Some horizontal stripes might be visible on the image while magnification is active. ● This function is not available in the following cases: - The USB TYPE A port is selected as the input source. - A sync signal in the range not supported is input. - There is no input signal. 26