Hitachi PJ TX100 Owners Guide - Page 22

Multifunctional settings IMAGE Menu With the IMAGE menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU ASPECT OVER SCAN V POSITION H POSITION H PHASE H SIZE AUTO ADJUST :SELECT 4:3 95 25 142 16 1344 Item ASPECT OVER SCAN V POSITION H POSITION H PHASE Description Select an Aspect Ratio using the ▲/▼ buttons: At a COMPUTER input: 4:3 16:9 NORMAL • The NORMAL keeps the original aspect ratio of the input signal. • At a COMPUTER input, selecting an aspect ratio may display the message"SYNC IS OUT OF RANGE". In this case, please select one of other aspect ratios. At a DVI-D input: 4:3 16:9 WIDE MOVIE1 MOVIE2 NORMAL At a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input: 4:3 16:9 WIDE MOVIE-1 MOVIE-2 • At a COMPONENT VIDEO input of 16:9 HD signal of 1125i(1080i)/ 750p(720p), only 16:9 can be selected. At no input.: 4:3 16:9 Adjust the over-scan ratio using the ▲/▼ buttons. : Small Large memo This item can be selected only at a video signal. memo When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Adjust the vertical position using the ▲/▼ buttons. : Up Down memo This item cannot be selected only at a DVI-D signal. Adjust the horizontal position using the / buttons. : Left Right memo This item cannot be selected only at a DVI-D signal. Adjust the horizontal phase to eliminate flicker using the ▲/▼ buttons. : Right Left memo This item can be selected only at a RGB signal or a component video signal. 22