Hitachi PJ TX100 Owners Guide - Page 26

Multifunctional settings SETUP Menu With the SETUP menu, items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU KEYSTONE WHISPER IRIS MIRROR :SELECT +0 NORMAL 100 NORMAL Item KEYSTONE WHISPER IRIS MIRROR Description Adjust the Keystone (Vertical) Distortion: Upper in the data Lower in the data memo The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well. memo When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. memo When the WIDE is selected under the ASPECT item of the IMAGE menu, this adjustment is ignored. memo When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible. Select the NORMAL or the WHISPER using the ▲/▼ buttons. : NORMAL WHISPER When the WHISPER is selected, acoustic noise and screen brightness are reduced. Adjust the iris using the ▲/▼ buttons. : Bright Dark Select a mirror status using the ▲/▼ buttons. : NORMAL H:INVERT V:INVERT H&V:INVERT 26