HoMedics AR-NC02 Downloadable Instruction Book - Page 4
Operating Instructions
View all HoMedics AR-NC02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Operating Instructions Getting Started • Take the air cleaner out of the box and remove the clear protective plastic bag. • Place the air cleaner on a firm level surface. • Before turning ON THE AIR CLEANER, if you choose to use the optional VOC filter, you will need to install it and confirm that all the filters are firmly in place. 1. Open the rear grill by gently pushing the release tabs toward the outside of the unit. See Fig. 1 TABS Fig. 1 2. Pull the grill away from the body until the tabs at the bottom of the grill plate easily slide away from the unit. See Fig. 2 & 3 Fig. 2 3. The pre-filter and Nano-Coil filter will be installed already. Confirm that Nano-Coil filter is fully engaged on center hub. To install the VOC/Odor filter (optional), remove the VOC/Odor filter from the plastic bag. Place the VOC filter into the unit flush against the pre-filter, secured by four clips. Fig. 4 See Fig. 4 4. Place the tabs at the bottom of the grill TABS plate into the base of the unit. See Fig. 5 Fig. 5 5. Hold engaged bottom of the grill plate in place and push the top of the grill plate back toward the unit. The release tabs at the top of the grill will click back into place. See Fig. 6 Fig. 6 Fig. 3 6 7