Homelite UT43103 User Manual - Page 30
Call Us First
View all Homelite UT43103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
BAR AND CHAIN COMBINATIONS Chain specifications: .375 in. pitch, low profile skip tooth, .050 in. chain gauge Length of Bar 14 in. Guide Bar Part Number 310625001 Chain Part Number 901212001 TROUBLESHOOTING Drive Links 52 Problem Possible Cause Solution Bar and chain running hot and smoking. Check chain tension for over tight condition Chain oil tank empty. Tension chain. Refer to Adjusting Chain Tension earlier in this manual. Check oil tank. Motor runs, but chain is not rotating. Chain tension too tight. Check guide bar and chain assembly. Check guide bar and chain for damage. Retension chain, Refer to Adjusting Chain Tension earlier in this manual. Refer to Replacing Bar and Chain earlier in this manual. Inspect guide bar and chain for damage. Motor runs, chain Dull chain. Sharpen chain. rotates but does not cut. Chain on backwards. Reverse direction of chain. Chain tensioning dial is difficult to turn. Tip of guide bar is not raised. Chain cover lock knob is too tight. Raise tip of guide bar while rotating tension adjustment dial. Press in the clutch cover lock knob and rotate counterclockwise to slightly loosen the clutch cover before attempting to adjust chain tension. CALL www.homelite.com CALL US FIRST For any questions about operating or maintaining your product, call the Homelite® Help Line! Your product has been fully tested prior to shipment to ensure your complete satisfaction. Page 30 - English