Honeywell HW2000i Owners Manual - Page 14

Front and Back View Front and Back View Front and Back View HW1000i Model 4 3 2 5 6 7 8 1 B A F C G D A-Control Panel 1. Outlets 125VAC outlet(s) (NEMA 5-15R [HW1000i model] and NEMA 5-20R [HW2000i model]) to connect 120V appliances to generator for power. DC outlet ranges from 12 to 18 volts and is unregulated. This outlet should not be used for battery charging. WARNING NEVER use unapproved DC cables as this can result in circumstances leading to death, serious injury, and property damage. ALWAYS use Honeywell DC accessory cables (sold separately) available from a Honeywell dealer. 2. Ground Terminal Connects generator to ground wire for grounding protection. CAUTION Generator must be grounded to prevent electrical shock from faulty appliances. See page 6. J E H 3. Breakers Protect circuits from damage caused by overload or short-circuit by stopping flow DC of electricity from generator to the appliance. If there is no power at outlets, see AC "Troubleshooting" on page 27. 4. Overload Indicator Light Set Tripped Illuminates red when the generator is overloaded or if there is a short circuit in a connected appliance. Turn the generator off immediately and determine the reason for the overload. 5. Output Indicator Light Illuminates green when the generator is running under normal operating conditions. 6. Oil Alert Indicator Light Illuminates red when low oil conditions are present and the generator is running (or while recoil is pulled). The engine will automatically stop to prevent generator damage. 8 www.honeywellgenerators.com HW1000i / HW2000i Inverter Generator Owner's Manual