Honeywell RTH5100B Owner's Manual - Page 14

Position the wallplate over the wall anchors.

Get Honeywell RTH5100B PDF manuals and user guides View all Honeywell RTH5100B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Step 6. Mount New Wallplate to Wall (Cont) 4. Move the wallplate aside and drill holes at the locations marked on the wall. Drill 3/16 in. holes for drywall or 7/32 in. holes for plaster. 5. Tap the wall anchors into the drilled holes until even with the wall surface. DRILLED HOLES (2) WALL ANCHORS (2) WALLPLATE RC R Y NOT USED (O/B) W G MOUNTING SCREWS (2) M22046 6. Position the wallplate over the wall anchors. 7. Insert the mounting screws into the wall anchors. Check leveling, if desired, and tighten the mounting screws. 69-1716 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
69-1716
14
Step 6. Mount New Wallplate to Wall (Cont)
4.
Move the wallplate aside and drill holes at the
locations marked on the wall. Drill 3/16 in. holes
for drywall or 7/32 in. holes for plaster.
5.
Tap the wall anchors into the drilled holes until even
with the wall surface.
6.
Position the wallplate over the wall anchors.
7.
Insert the mounting screws into the wall anchors.
Check leveling, if desired, and tighten the mounting
screws.
M22046
DRILLED HOLES (2)
WALL
ANCHORS (2)
MOUNTING
SCREWS (2)
WALLPLATE
G
W
NOT
USED
Y
R
R
C
(O/B)