Honeywell RTH5100B Owner's Manual - Page 15
Step 7. Connect Wires to New Wallplate
View all Honeywell RTH5100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Step 7. Connect Wires to New Wallplate 1. Match the labeled wires to the letter designations on the wallplate. 2. If wires are to be connected to both Rc and R, loosen the Rc and R screw terminals and remove the metal jumper. 3. If only one of the terminals, Rc or R, is to be connected, leave metal jumper in place. METAL JUMPER TERMINAL BLOCK SCREW TERMINALS LETTER DESIGNATIONS RC R Y NOT USED O/B W G WALLPLATE RC R Y W/O/B G M22180 15 69-1716
15
69-1716
Step 7. Connect Wires to New Wallplate
1.
Match the labeled wires to the letter designations
on the wallplate.
2.
If wires are to be connected to both Rc and R,
loosen the Rc and R screw terminals and remove
the metal jumper.
3.
If only one of the terminals, Rc or R, is to be
connected, leave metal jumper in place.
M22180
G
W/O/B
Y
R
RC
WALLPLATE
METAL JUMPER
G
O/B W
Y
R
R
C
SCREW TERMINALS
TERMINAL BLOCK
LETTER
DESIGNATIONS
NOT
USED