Hoover C1703900 Manual - Page 22

filter bag: How to Replace ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. 4.1 4.2 B 4.1 To change filter bag, push down at top of bag door and pull door forward. Remove door. A 4.2 Grasp filter bag collar (A) and pull collar from tube (B). IMPORTANT Do not clean out old filter bag and reuse. Discard used filter bag. Hold new filter bag as shown. Align opening in filter bag with (B). Push (A) firmly onto (B). Tuck in filter bag. 4.3 Reposition bag door by placing tabs on bottom of door into opening (C). Press top of door to snap securely shut. 4.3 C filters: How to Clean ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not operate cleaner without either the secondary or final filter in place. Secondary Filter 4.4 The secondary filter (A), located behind the grill in the bottom of bag compartment, protects the motor from dirt particles. If filter becomes dirty, pull off grill and lift out filter. Hand wash filter in cold water with mild detergent, then air dry. Reposition dry filter and grill. What to Buy Use only genuine HOOVER® Secondary Filter with your vacuum. When purchasing a new Secondary Filter, ask for Hoover® Part No. 38765-019. 4.4 A 4.5 Final Filter The final filter assists in the filtration process to return clean air to the room. 4.5 To remove this filter when it be-comes dirty, remove bag door and pull down top of filter. 4.6 Lift out filter (B) and hand wash it in cold water with mild detergent. Let filter air dry and reposition it on the side of the cleaner. Reposition bag door. What to Buy Use only genuine HOOVER® Final Filter with your vacuum. When purchasing a new Final Filter, ask for Hoover® 11 4.6 B