Hoover H3060 Manual - Page 8
General operation - floormate spinscrub 800
UPC - 073502027998
View all Hoover H3060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Transporting 16 To move your cleaner from room to room, put handle in upright posi- tion, tilt cleaner back on rear wheels and push forward. 17 The cleaner may also be lifted using the carrying handle (A) on the front of the cleaner. 16 17 A General operation Your HOOVER FloorMate™ SpinScrub™ 800 Cleaner can be used to both vacuum dry debris and wet clean non-carpeted floor surfaces such as vinyl, tile, marble and sealed wood. It is not intended for use on carpet or rugs. CAUTION: To prevent damage to wood floors, follow the flooring manufacturer's cleaning recommendations. If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separated joints. Do not use FloorMate™ SpinScrub™ Cleaner to wet clean sealed wood floors if any of these conditions exist. Mode selector dial 18 A 18 The Mode selector dial (A) turns the brushes on and off. 19 For dry debris pickup, turn the dial to the DRY VAC position. In this position, the brushes will not rotate and are raised off the 19 floor surface. To wet clean with brushes turned ON, turn the dial to the WASH position. For wet pickup, turn the dial to the WET PICKUP position. Refer to "How to clean" section for complete cleaning instructions. 8