Hoover U5753960 Manual - Page 5
How to use
View all Hoover U5753960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. How to use Cleaner description 2-1 1 2 6 5 8 9 3 4 7 24 10 23 11 12 13 18 19 20 17 14 15 16 The assembled cleaner will look like the drawing. Model with Powered Hand Tool is shown. 1. Handle 2. ON/OFF switch 3. Tool cover 4. Dusting brush 5. Powered hand tool* or Crevice tool* 19. Embedded DirtFINDER™ sensitivity switch 20. Edge groomers 21. Hose 22. Hose rack (depending on model) 6. Furniture nozzle 21 7. Dirt cup latch 8. Dirt cup lid 22 9. Dirt cup 10. Dirt cup handle 26 11. HEPA cartridge filter 12. Pre-filter 13. Final filter 23. Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release. 24. Carrying handle 25. Extension wands 26. Crevice wand*: stores in rear wand. 25 14. Three position handle release pedal: step on lever to lower handle to *Some models only operating or low positions. 15. Nozzle control knob: slide knob to correct setting for height of carpet being cleaned. 16. Furniture guard 17. Headlight Operate cleaner only at voltage specified on data plate on bottom of cleaner. This cleaner is intended 18. DirtFINDER™ display for household use. Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. ON-OFF switch Plug cord into electrical outlet. To turn cleaner ON, push switch up. To turn cleaner OFF, push switch down. 2-2 2-3 2-4 Transporting cleaner To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward. Carrying cleaner The cleaner can also be moved by using the carrying handle. Handle positions The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle. Continued § 5