Hoover WH20400 Product Manual - Page 14
To Sanitize, Surfaces
View all Hoover WH20400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TO SANITIZE HARD SURFACES Select the "STEAM ONLY" setting. Connect the microfiber pad and run a minimum of 6 strokes at a medium pace (5-7 seconds per 32" stroke) across same area. Allow to dry. 4 To produce steam, squeeze the trigger. To prevent over-wetting floors, avoid holding the trigger continuously. 11 5 6 Move the steam mop slowly back and forth across To engage SteamStream™ from the front nozzle, press the SteamStream™ button to the floor paying particular activate and squeeze the trigger to release attention to high traffic steam. Press the SteamStream™ button to areas. Squeeze/release turn OFF (0=OFF). trigger as required.
11
4
5
To produce steam,
squeeze the trigger.
To prevent over-wetting
floors, avoid holding the
trigger continuously.
Move the steam mop slowly
back and forth across
the floor paying particular
attention to high traffic
areas. Squeeze/release
trigger as required.
TO SANITIZE
HARD
SURFACES
Select the
"STEAM ONLY"
setting.
Connect the
microfiber pad and
run a minimum
of 6 strokes at
a medium pace
(5-7 seconds per
32" stroke) across
same area. Allow
to dry.
6
To engage SteamStream™ from the front
nozzle, press the SteamStream™ button to
activate and squeeze the trigger to release
steam. Press the SteamStream™ button to
turn OFF (0=OFF).