Humax PVR-9150T User Manual

Humax PVR-9150T Manual

Get Humax PVR-9150T PDF manuals and user guides View all Humax PVR-9150T manuals
Add to My Manuals
Save this manual to your list of manuals

Humax PVR-9150T manual content summary:

  • Humax PVR-9150T | User Manual - Page 1
    Digital Personal Video Recorder User's Manual PVR-9150T The default password is 0000. Please read this manual carefully before setting up your Personal Video Recorder PVR-9150T.
  • Humax PVR-9150T | User Manual - Page 2
    a film divided in to two parts by a News programme) you will be given the option to set both parts to record. Note: The above Freeview Playback features are available on channels where the correct and accurate data is being broadcast. Some channels may not support all services. GB1 User's Manual
  • Humax PVR-9150T | User Manual - Page 3
    Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without
  • Humax PVR-9150T | User Manual - Page 4
    users: Please contact either the retailer Humax Customer Helpline on 0844 669 8800 for information on Freeview coverage in your area. • Text your postcode to Freeview on 83331 (standard text rates apply). Freeview will reply with advice on whether you can receive Digital TV. • Telephone Freeview
  • Humax PVR-9150T | User Manual - Page 5
    start any maintenance or installation procedures. 2. OVERLOADING CONNECTION TO THE TV • Disconnect the product from the mains before connecting or disconnecting the cable from the TV. Failure to do so can damage the TV have followed the manufacturer's instructions for mounting. • Do not User's Manual
  • Humax PVR-9150T | User Manual - Page 6
    be sure the service technician uses Hard Disk Drive • Do not move the product or turn the power off suddenly while the hard disk drive is running. The company shall not be liable for any corruption of data on the hard disk drive caused by the carelessness or misuse of users. GB5 User's Manual
  • Humax PVR-9150T | User Manual - Page 7
    GB9 1.3 Conditional Access GB10 1.4 Rear Panel GB11 1.5 Remote Control GB12 2. Setup GB15 2.1 Connecting the Antenna GB15 2.2 Connecting the TV GB16 2.3 Connecting the TV and VCR GB17 2.4 Powering On GB19 3. Installation Wizard GB20 3.1 Search GB20 4. Basic Operation GB21 4.1 Switching
  • Humax PVR-9150T | User Manual - Page 8
    Software Update from PC GB60 12. System GB61 12.1 Status GB61 12.2 Signal Detection GB61 12.3 Common Interface GB61 13. Appendix GB62 13.1 Menu Map GB62 13.2 Trouble Shooting GB63 13.3 Error Message GB67 13.4. Specification GB68 13.5 Glossary GB70 13.6 Service and Support GB71 GB7 User
  • Humax PVR-9150T | User Manual - Page 9
    contents before using your product. User's Manual Remote Control User's Manual Quick Guide Quick Guide Batteries SCART Cable Note: Package contents may vary according to area. Warning: The company shall not be liable for problems caused by changing hard disk drive by user. GB8 User's Manual
  • Humax PVR-9150T | User Manual - Page 10
    between TV and radio modes. 7. CH-/CH+ BUTTON Moves the TV/radio channel up or down. 8. RECORD BUTTON Records programme. 9. STOP BUTTON Stops recording or playback. 10. CI-MODULE SLOT A slot for a CI-Module Note: The front of the product is subject to change without notice. GB9 User's Manual
  • Humax PVR-9150T | User Manual - Page 11
    decode the channels. 1. Open the right-hand flap on the front of the product. 2. Follow the instructions of the module and insert the Smartcard into the CI-Module. 3. Keep the CI-Module (with the Smartcard) horizontal. 4. Insert the CI-Module into the slot. GB10 User's Manual CI-Module Smartcard
  • Humax PVR-9150T | User Manual - Page 12
    DVD using a VCR SCART cable. 3. RS-232C Connects to the PC to update software. 4. ANTENNA IN Connects the aerial cable. 5. TV/VCR Connects to the RF IN of the TV or VCR using an RF cable. 6. ON/OFF Powers on/off. Note: The rear of the product is subject to change without notice. GB11 User's Manual
  • Humax PVR-9150T | User Manual - Page 13
    remote control to find the additional buttons. Note: The remote control is subject to change without notice. 1. NUMERIC(0-9) BUTTONS Enters a TV/radio channel number or menu option number. 2. MENU Displays the main menu. 3. PLAYBACK CONTROL the channel and programme information. GB12 User's Manual
  • Humax PVR-9150T | User Manual - Page 14
    the Product Please slide down the bottom section of the remote control to find the additional buttons. 10. STANDBY Switches between operation and standby modes. 11. TEXT Enters digital text service. 12. GUIDE Displays the programme guide. 13. OK Selects a menu or confirms the selected operation
  • Humax PVR-9150T | User Manual - Page 15
    down the bottom section of the remote control to find the additional buttons. 18 press this button, speed is slowed progressively more. r. COMMERCIAL SKIP Jumps ahead in a recording. (See section 5.6) 19. PIP BUTTONS s. PIP Displays . TV/RADIO Switches between TV and radio modes. GB14 User's Manual
  • Humax PVR-9150T | User Manual - Page 16
    . Note: If you encounter any problems setting up your product, please contact your local product distributor. 2.1 Connecting the Antenna Connect your aerial to the ANTENNA IN. Note: Connect the product and the TV using an RF cable to watch analogue channels. RF Cable TV Antenna IN GB15 User's Manual
  • Humax PVR-9150T | User Manual - Page 17
    2. Setup 2.2 Connecting the TV 1. Using SCART Cable Connect the product and the TV using a SCART cable. SCART Cable TV SCART GB16 User's Manual
  • Humax PVR-9150T | User Manual - Page 18
    2. Setup 2.3 Connecting the TV and VCR 1. Using SCART Cable Connect the product and the TV/VCR using a SCART cable. SCART Cable SCART Cable TV SCART VCR SCART GB17 User's Manual
  • Humax PVR-9150T | User Manual - Page 19
    Cable 1. Connect the TV/VCR (LOOP OUT) of the product and the aerial input of the VCR using an RF cable. 2. Connect the aerial output of the VCR and the aerial input of the TV using an RF cable. TV Antenna IN TV Antenna OUT RF Cable VCR Antenna IN VCR Antenna OUT RF Cable GB18 User's Manual
  • Humax PVR-9150T | User Manual - Page 20
    2. Setup 2.4 Powering On 1. Connect the power cord of the product to a wall outlet. 2. Turn on the power switch located at the back left of the product. 3. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. Zoom in 1 4 7 MENU STANDBY 2
  • Humax PVR-9150T | User Manual - Page 21
    unwanted channels, select Save to save the changes. Warning: If you exit the install wizard without fully completing the channel searching procedure, you may not have all of the channels available. In this case, you can use the installation menu to search for the channels. GB20 User's Manual
  • Humax PVR-9150T | User Manual - Page 22
    instructions(press color buttons). 1. Press the TEXT button to access digital teletext. 2. Press the TEXT button again to return to normal viewing. 3. Press the CH+/CH- button to exit this service. Note: Interactive service(MHEG) is not available when subtitles are displayed. GB21 User's Manual
  • Humax PVR-9150T | User Manual - Page 23
    only if the programme is recording. Displayed only if the TV channel) channel. Displayed only when subtitle information is available. PKHJ Displayed when the channel supports teletext (MHEG). Displayed when the channel supports available, programme information is not displayed. GB22 User's Manual
  • Humax PVR-9150T | User Manual - Page 24
    information about how to change favourite group name and how to register favourite channels from the complete channel list, please refer to 4.6 Channel List. GB23 User's Manual
  • Humax PVR-9150T | User Manual - Page 25
    by pressing the SOUNDTRACK button on the remote control. • You can select the default audio language you want in MENU-Preferences-Language Setting-Audio Language. • If your receiver is connected to a TV that does not support compressed audio using a HDMI cable, the audio may not function. Select
  • Humax PVR-9150T | User Manual - Page 26
    and press the OK button. 5. You will be prompted to enter the password. Enter the password to unlock the channel. 6. Move to the parent menu using the button to save and press the OK button. 4. Enter the password using the NUMERIC(0-9) buttons to delete the current channel. GB25 User's Manual
  • Humax PVR-9150T | User Manual - Page 27
    list is displayed, the channel list will switch between TV and radio channel lists. • To display scramble icon in the channel list, select On in MENUPreferences-Miscellaneous Settings-Option in CH List. • The favourite lists will only appear if you have created them first. GB26 User's Manual
  • Humax PVR-9150T | User Manual - Page 28
    , as displayed in the following figure. 1:6 PIP screen Normal screen 1:1 PIP screen 2. Swapping the PIP Screen This function is available in 1:6 PIP or 1:1 PIP. Press the SWAP PIP button on the remote control to swap the main screen for the PIP screen. Press the CH+/CH- button to change the main
  • Humax PVR-9150T | User Manual - Page 29
    button. PIP CH+ PIP CH- SOURCE OPT+ PIP WIDE PIP CH+ PIP CH- MOVE SWAP 4.8 Game Provides various games for user's entertainment. 1. Press the GAME button. 2. According to the instruction displayed on screen, you can enjoy the game using the / / / and OK button. Note: Press the EXIT or BACK
  • Humax PVR-9150T | User Manual - Page 30
    5. PVR 5.1 Time Shifted Recording (TSR) You can perform TSR (Time Shifted Recording) and other functions similar to VCR functions using the playback control buttons while playing a programme. The product automatically saves the programme in the embedded hard disk drive temporarily, so that users can
  • Humax PVR-9150T | User Manual - Page 31
    normal speed. 5. TSR Recording Press the RECORD button on the remote control to record the current programme immediately. While the time shift operation records the programme temporarily, this record operation records the programme permanently so you can playback the recorded programme at any time
  • Humax PVR-9150T | User Manual - Page 32
    5. PVR 5.2 Recording Using the built-in hard disk drive, you can record a programme without an external media device such as a VCR. 1. General Recording Press the RECORD button on the remote control to record the current programme instantly. You can select the point you want to record using the /
  • Humax PVR-9150T | User Manual - Page 33
    5. PVR 5.3 Programme Playback in the Play List You can playback the recorded programme by pressing the PLAY LIST button. You can switch among VIDEO(TV), AUDIO (radio) and Selected Files list using the / button. 1. VIDEO/AUDIO List 1. Select VIDEO/AUDIO list using the / button. 2. Select a programme
  • Humax PVR-9150T | User Manual - Page 34
    5. PVR 5.4 Chase Play You can watch the programme from the beginning as the rest of the programme is simultaneously being recorded. While recording two channels simultaneously, you can perform TSR (Time Shifted Recording) using the playback control buttons. Note: You can playback the programme
  • Humax PVR-9150T | User Manual - Page 35
    PVR 5.6 Additional Time Shift Operations You can perform additional time shift operations using the following buttons on the remote control. 1. Direct Jump Press the PLAY button while watching TV Mode You can select a specific block within a recorded programme and play it back User's Manual
  • Humax PVR-9150T | User Manual - Page 36
    recording using the information given. Note: Press the BACK, EXIT or GUIDE button to exit the guide screen. 6.1 Viewing Programme Guide the GUIDE button. 1. Information of the Programme Guide Screen The TV guide is displayed if the programme is reserved for recording. Auto tracking 3. Group name
  • Humax PVR-9150T | User Manual - Page 37
    to view the detailed information (if available) of the selected programme. 3. Scheduling Recording You can automatically schedule recording in the scheduled programme and pressing button and then press the OK button. The programme guide for the selected channel list is displayed. GB36 User's Manual
  • Humax PVR-9150T | User Manual - Page 38
    time bar. 1. Press the GUIDE button. 2. Press the GREEN REWIND/FAST FORWARD and INSTANT PLAY/COMMERCIAL SKIP buttons on the remote control. 5. Each button functions as follows. You can add or edit recording-reserved programmes using the schedule screen. 1. Press the GUIDE button. 2. Press the YELLOW
  • Humax PVR-9150T | User Manual - Page 39
    can find the programme you want by entering the name and genre of the programme. 1. Press the GUIDE button. 2. Press the BLUE button to display the keyboard. 3. Enter the programme name on the • Found Programme List may differ depending on the provided programme information. GB38 User's Manual
  • Humax PVR-9150T | User Manual - Page 40
    recorded programme list appears. Note: • The programme being recorded will be added to the recorded programme list after it has been recorded time starts recording first. If recorded due to the conflict with other reservations. Error Displayed only when the recording /Unselecting Recorded Programmes
  • Humax PVR-9150T | User Manual - Page 41
    point using the / button and press the RECORD button. Press the STOP button. A pop-up will appear. Select Save and press the OK button to save the selected part. Select Reset and press the OK button to reset the edit. Warning: This function will overwrite the original recording. GB40 User's Manual
  • Humax PVR-9150T | User Manual - Page 42
    RECORD button. Press the STOP button. A pop-up will appear. Select Delete and press the OK button to delete the selected part. Select Reset and press the OK button to reset the recorded programme into separate recordings. Select the point you want to split using the / button and press the RECORD
  • Humax PVR-9150T | User Manual - Page 43
    using the / button and press the OK or button. 3. Select Recording Schedule using the / button and press the OK or button to display the reserved recording list on the screen. Note: You can schedule recording easily using the programme guide. Refer to Chapter 6. Programme Guide. GB42 User's Manual
  • Humax PVR-9150T | User Manual - Page 44
    will be displayed when the programme is being recorded. • Press the i button to see the detailed information about the programme you have selected if provided. Tip: The default password is 0000. If you have forgotten your password, please contact your local product distributor. GB43 User's Manual
  • Humax PVR-9150T | User Manual - Page 45
    7. Record 4. Sorting by Time/Name Each time you press the BLUE button, the sorting order of the reserved programmes change in the following you want to edit and press the OK button. 2. For more information about how to edit the information, refer to 7.2.3 Adding a Reservation. GB44 User's Manual
  • Humax PVR-9150T | User Manual - Page 46
    You can check the free space of the hard disk drive and format (erase) the disk drive if necessary. 1. Press the MENU button. 2. Select Record using the / button and press the OK or button. 3. Select HDD Control using the / button and press the OK or button. 4. You can check the free, used, reserved
  • Humax PVR-9150T | User Manual - Page 47
    Enter New Password using the NUMERIC(0-9) buttons, select OK and press the OK button. 3. Enter the new password again to confirm Verify Password and select OK and press the OK button. Note: If you have changed and forgotten your password please contact the Humax Customer Helpline. GB46 User's Manual
  • Humax PVR-9150T | User Manual - Page 48
    the SUBTITLE button on the remote control. Note: Interactive service(MHEG) is not available when subtitles are displayed. 3. Subtitle Font You can select the subtitle font . 1. Select Subtitle Font using the / button. 2. Select from Variable and Fixed using the OK or button. GB47 User's Manual
  • Humax PVR-9150T | User Manual - Page 49
    is set automatically whenever GMT offset changes. • The time is detected from the Digital Transmitter that you receive the Digital channels from. It is not possible to enter the time. 2. Power On You product is automatically powered on/off overlapped with a recording schedule. GB48 User's Manual
  • Humax PVR-9150T | User Manual - Page 50
    . 3. Select A/V Control using the / button and press the OK or button. 1. TV-SCART You can set the TV SCART output. 1. Select TV-SCART using the / TV. 1. Select Screen Ratio using the / button. 2. Select from 4:3 (Conventional TV) and 16:9 (Widescreen TV) using the OK or button. GB49 User's Manual
  • Humax PVR-9150T | User Manual - Page 51
    will display Auto. Note: If you have set the Screen Ratio to 16:9 you may also need to adjust your TV set to its 16:9/Auto /Wide format. 8.5 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the %, 50% and 75% using the / button and press the OK button. GB50 User's Manual
  • Humax PVR-9150T | User Manual - Page 52
    and 30 using the / button and press the OK button. 5. Commercial Skip Time You can skip 15,30, 60 or 120 seconds of the unwanted scenes. 1. Select Commercial skip time using the / button and press the OK or button. 2. Select . 2. Select from On and Off using the OK or button. GB51 User's Manual
  • Humax PVR-9150T | User Manual - Page 53
    OK button to select/unselect all channels. Note: • Press the TV/RADIO button to move to the TV or radio channel list directly. • When the locked channel(s) is The default password is 0000. If you have forgotten your password, please contact your local product distributor. GB52 User's Manual
  • Humax PVR-9150T | User Manual - Page 54
    edit using the / button and press the OK button. Note: Press the TV/RADIO button to move to the TV or radio channel list directly. The icons for editing the favourite channel list are by number or name in all TV/radio channel list. Unselect All Unselects all the selected channel. GB53 User's Manual
  • Humax PVR-9150T | User Manual - Page 55
    connected to the aerial and television, you can automatically search channels without entering any other information. 1. Press the MENU button. 2. Select Installation using the / button and press the OK or button. 3. Enter the password button and try to reset the search operation again User's Manual
  • Humax PVR-9150T | User Manual - Page 56
    , using the MUX information. 1. Press the MENU button. 2. Select Installation using the / button and press the OK or button. 3. Select Manual Search using the / button and press the OK or button. 1. Search using the / button. 2. Select Enable/Disable using the OK or button. GB55 User's Manual
  • Humax PVR-9150T | User Manual - Page 57
    installation wizard, refer to Chapter 3. Installation Wizard. Tip: The default password is 0000. If you have forgotten your password, please contact your local product distributor. 10.4 Antenna Power Make sure to set the Antenna Power to On when you connect power cord for itself. GB56 User's Manual
  • Humax PVR-9150T | User Manual - Page 58
    most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. http://www.humaxdigital.com It is recommended that you periodically check for the availability of software update. Important: In order to receive Software Updates Automatically you must
  • Humax PVR-9150T | User Manual - Page 59
    . Software Update 11.2 Updating Software from Menu 1. Press the MENU button. 2. Select Installation using the / button and press the OK or button. 3. Enter the password using the NUMERIC(0-9) buttons. 4. Select Software Update using the / button and press the OK or button. Tip: The default password
  • Humax PVR-9150T | User Manual - Page 60
    manual update menu. 8. Select Yes and press the OK button to start updating. Select No and press the OK button to return to the previous menu. 9. Performs software update. Please wait until it is completed. 10. When completing the software update auto update will only work when if the product is in
  • Humax PVR-9150T | User Manual - Page 61
    . humaxdigital.com). 2. Download and install the download tool from our website. 3. Connect your PC to this product with an RS-232C serial cable. 4. Execute the installed download tool and follow the instructions provided. 5. Power On/Off to start operating. RS-232C Cable RS-232C GB60 User's Manual
  • Humax PVR-9150T | User Manual - Page 62
    -Module. 1. Select Common Interface using the / button and press the OK or button. 2. Select Slot and press the OK or button. If Common Interface is available, you can view slot information. Note: The displayed information about a Common Interface may differ depending on Common Interface type. GB61
  • Humax PVR-9150T | User Manual - Page 63
    1 Recorded Programme 2 Recording Schedule 3 HDD Control 4 Recording's Start Time 5 Recording's End Time 1 Parental Control 2 Language Setting 3 Time Setting 4 A/V Control 5 Miscellaneous Settings 1 Edit Channel Lists 2 Edit Favourite Channels 1 Automatic Search 2 Manual Search 3 Software Update
  • Humax PVR-9150T | User Manual - Page 64
    that the antenna is connected correctly. • Use the appropriate antenna capable of receiving VHF or UHF channels for your area. 9. Cannot update new software. • You can get an update. If the product does not show a message requesting update, that means no software is available. GB63 User's Manual
  • Humax PVR-9150T | User Manual - Page 65
    the PVR and TV is up. Check that the PVR and the TV are not set to Mute. Make sure that the Scart cable to the TV set is connected to the "TV" scart connection on the back of the PVR. 19. My remote control does not have all of the functions that are displayed in the User Manual. • The PVR remote has
  • Humax PVR-9150T | User Manual - Page 66
    on the remote control, then use the arrows to navigate to the function buttons. 21. I am trying to download the software via my PC but it will not start. • When you receive the message ˇ°Waiting for Humax connectionˇą on your PC, make sure that the cables from the PC to the PVR are connected, and
  • Humax PVR-9150T | User Manual - Page 67
    it on the full screen, instead it only plays back in the small thumbnail at the top of the screen. • When you access the Recorded Programmes menu and press play on the recording you wish to view, press the EXIT button on the remote control to see the recording on the full screen. GB66 User's Manual
  • Humax PVR-9150T | User Manual - Page 68
    resolve the problem, you may need to have your aerial and installation tested by a professional. The channel is scrambled or not available. The not CI-Module is not installed. installed./ Invalid CI-Module is not properly inserted. CI-Module CI-Module is broken. Install proper CI-Module. Pull
  • Humax PVR-9150T | User Manual - Page 69
    13. Appendix 13.4. Specification Tuner & Channel Input stereo A/V & Data In/Out Video TV SCART/VCR SCART Video Output (CVBS, S-Video, RGB) Audio L/R TV SCART/VCR SCART Volume and Mute Control (Resolution:20bits DAC, MAX. 2Vrms) Separate internal fuse & Lightning protection GB68 User's Manual
  • Humax PVR-9150T | User Manual - Page 70
    13. Appendix Physical Specification Size Weight (Net) Operating Temperature Storage Temperature 360 mm x 50 mm x 245 mm 2.9kg 0 ºC to +45 ºC -10 ºC to +70 ºC GB69 User's Manual
  • Humax PVR-9150T | User Manual - Page 71
    of the software for their products. 10. PIP (Picture In Picture) A function that allows you to display 2 different TV channels (or TV inputs) on one screen. 11. PVR (Personal Video Recorder) Video recorder that can record and play back programmes directly using the embedded hard disk drive(s). 12
  • Humax PVR-9150T | User Manual - Page 72
    .6 Service and Support You can get information such as a troubleshooting guide, software upgrades and product support guide from -Fr 8:00-23:00 Uhr, Sa-So. 8-20 Uhr [email protected] www.humax-digital.de Deutsch/English/Turkish Australia Tel: Opening Hours: E-mail: Website GB71 User's Manual
  • Humax PVR-9150T | User Manual - Page 73
    Mån-fre 08:00-16:30 Svenska/engelska 09 56186366 ma-pe 8:00-16:00 suomi/englanti 0820 400675 (€0,14/min) Mon-Sun 8:00-23:00 [email protected] www.humax-digital.de Deutsch/English/Turkish GB72 User's Manual
  • Humax PVR-9150T | User Manual - Page 74
    www.humaxdigital.com

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.