Hunter 21117 Owner's Manual - Page 8

5 • Transmitter Installation 1. Install the 9 Volt alkaline battery inside the hand-held transmitter, after setting the DIP switches to match the DIP switches in the receiver. 2. Mount the remote holder over the ceiling fan's wall switch using the existing wall plate screws. Refer to Figure 10. 3. The transmitter can be placed on the remote holder for convenience or safekeeping. 4. There is a toggle switch beside the DIP switches on the transmitter. Move the toggle switch toward the side that reads "CFL" if you are going to operate the fan with CFL bulbs. Move the switch to the "INC" side if you are going to use incandescent bulbs. Fan Speed High Fan Speed Medium Fan Speed Low Fan Off Fan Light NOTE: Once the transmitter is installed, any household power switches connected to the fan will no longer operate the fan. Figure 10 Toggle Switch INC CFL Figure 11 8 41316-01 • 06/25/10 • Hunter Fan Company