Hunter 24852 Owner's Manual

Hunter 24852 Manual

Get Hunter 24852 PDF manuals and user guides View all Hunter 24852 manuals
Add to My Manuals
Save this manual to your list of manuals

Hunter 24852 manual content summary:

  • Hunter 24852 | Owner's Manual - Page 1
    For Your Records and Warranty Assistance Model Name Catalog/Model No Serial No Date Purchased Where Purchased For reference also attach your receipt or a copy of your receipt to the manual. 42813-01 • 09/18/06
  • Hunter 24852 | Owner's Manual - Page 2
    Operating and Cleaning Your Ceiling Fan 15 10 • Troubleshooting Guide 16 Your new Hunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating
  • Hunter 24852 | Owner's Manual - Page 3
    remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Support Brace Low Profile Mounting Style Ceiling Outlet Box Low Profile Mounting fits close to the
  • Hunter 24852 | Owner's Manual - Page 4
    fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326. Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called "Preparing the Fan Site." Proper ceiling fan
  • Hunter 24852 | Owner's Manual - Page 5
    Cover plate must be securely mounted, as it supports the entire weight of the fan. 2-1. Drill two pilot holes, 9/64" diameter in the 2 x 4 brace at the outermost holes in the outlet box. 2-2. Install the (3) Mounting Isolators into the top of the ceiling plate. 2-3. Thread the wire leads through the
  • Hunter 24852 | Owner's Manual - Page 6
    Decal Note: Please follow the instructions carefully, to insure proper mounting of the decal. Read through first to understand the concept. The decal comes complete with pressure sensitive tape and special clips to hold it to the ceiling. The decal is in four parts: the Landing Gear, Canopy/ Tail
  • Hunter 24852 | Owner's Manual - Page 7
    lines. Wing Decal (2) 12" Canopy/Tail Decal 11" Mark Ceiling in These Locations For Each Wing (Hide Marks Under Wing) Disk Strip  Wing Joint Landing Gear Line Decal Canopy/Tail Decal Mark Ceiling in These Locations For Each Wing (Hide Marks Under Wing) 191/2" Wing
  • Hunter 24852 | Owner's Manual - Page 8
    that have been driven into the ceiling. Leave the peel-off backing on the other side of the disks and strips until instructed to remove. 3-11. Peel the place on the ceiling. 3-14. Tighten wood screws securely. Remove the two pieces of tape that mark the corners. Hunter Fan Company Metal Disk
  • Hunter 24852 | Owner's Manual - Page 9
    Line Step 3-15 Landing Gear Decal Mark Ceiling in These Locations For Each Wheel (Hide a guide. 3-17. Drive 2 metal disk into the ceiling for each wing using the marks just placed in the ceiling as a guide. After the decal has been installed on ceiling, add two strips of black decal tape over the joint
  • Hunter 24852 | Owner's Manual - Page 10
    plate, insert the "T" end of the bracket into the large hole in the ceiling plate with the notch in it. Insert and rotate so top of motor is towards center of ceiling plate. Grommet Motor Bracket Step 4-1 Motor 10 Ceiling TOP Bracket Plate Step 4-2 Hunter Fan Company 42813-01 • 09/20/06
  • Hunter 24852 | Owner's Manual - Page 11
    5 • Wiring the Fan 5-1. Be careful when wiring so that you do not hit the motor and let it turn, or it could fall out of the it upwards and mounting with 3 shoulder screws supplied. Shoulder Screw 42813-01 • 09/20/06 Step 5-4 - 5-5 Motor Bracket 11 Shoulder Screw Step 5-6 - 5-7 Hunter Fan Company
  • Hunter 24852 | Owner's Manual - Page 12
    6 • Installing the Motor Housing 6-1. Install the motor housing to the ceiling plate using the (4) 8-32 machined screws that are pre-assembled into the side of the ceiling plate. #8-32 Screw Step 6-1 #8-32 x 1/2" Machine Screw Motor Housing 12 Hunter Fan Company 42813-01 • 09/20/06
  • Hunter 24852 | Owner's Manual - Page 13
    Blade Ring Blade Iron Armature Screw Step 7-3 Blade Assembly Screw 13 Hex Nut Blade Iron Armature Screw Hex Nut Wrench 42813-01 • 09/20/06 Hunter Fan Company
  • Hunter 24852 | Owner's Manual - Page 14
    chain comes out the bottom hole in the nosecone. Hand tighten only. CAUTION: Do not overtighten nosecone. Overtighting may damage the cone. Step 8-1 Nosecone 14 Hunter Fan Company 42813-01 • 09/20/06
  • Hunter 24852 | Owner's Manual - Page 15
    . 9-3. Ceiling fans work best fan off and let it come to a complete stop. Remove the nosecone. Slide the revering switch on the fan to the opposite position. Re-Install nosecone. restart fan. Reversing Switch In cold weather, use upward air flow pattern 42813-01 • 09/20/06 Hunter Fan
  • Hunter 24852 | Owner's Manual - Page 16
    when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron armature screws. 3. Turn power off, support fan very carefully, and check that the motor bracket is properly seated. 16 If you need parts or service assistance, please call 888‑830‑1326 or
  • Hunter 24852 | Owner's Manual - Page 17
    ©2006 HUNTER FAN CO.™ 42813-01 • 09/20/06 S1t1e•pNToitteles 17 HUNTER FAN COMPANY ® 2500 FRISCO AVENUE MEMPHIS, TN 38114 Hunter Fan Company
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
42813-01 • 09/18/06
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased:
_________________
For reference also attach your receipt or a
copy of your receipt to the manual.