Hunter 24852 Owner's Manual - Page 16
Problem, Nothing happens; fan does not move., Noisy operation., Excessive wobbling.
View all Hunter 24852 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
10 • Troubleshooting Guide Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Check all connections according to the wiring the fan section. 3. Push motor reversing switch firmly left or right to ensure that the switch is engaged. 4. Pull the pull chain to ensure it is on. Problem: Noisy operation. 1. Tighten the blade assembly screws until snug. 2. Check to see if the blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade iron armature screws. 3. Turn power off, support fan very carefully, and check that the motor bracket is properly seated. 16 If you need parts or service assistance, please call 888‑830‑1326 or visit us at our WEB site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 Hunter Fan Company 42813-01 • 09/20/06