Hunter 24852 Owner's Manual - Page 6

3 • Installing the Plane Decal Note: Please follow the instructions carefully, to insure proper mounting of the decal. Read through first to understand the concept. The decal comes complete with pressure sensitive tape and special clips to hold it to the ceiling. The decal is in four parts: the Landing Gear, Canopy/ Tail and two Wings. Be sure the insignia emblem is mounted on top for the right wing and on bottom for the left wing. See Step 6-4. The ceiling should be clean and dry for proper adhesion of the tape strips. Ceiling Plate  3-1. Slide the Landing Gear decal and the Canopy/Tail decal behind the ceiling plate. 3-2. Align the decals with the ceiling plate and with one wall for squareness. 3-3. Tighten the wood screws on the ceiling plate just enough to hold the decals in place. 3-4. Put two small pieces of tape or another bonding application to temporaly secure the decal to the ceiling under the corners of the Landing Gear decal. Tape with Corners Marked Insigna Tape with Corners Marked Insigna Step 3-4 Hunter Fan Company Ceiling Plate 42813-01 • 09/20/06