Husqvarna AUTOMOWER 430X with installation service Owner Manual - Page 26

3.13.5 Edit day First select the day to edit from the Overview screen using the left/right arrow keys followed by OK. 2 time intervals per day can be entered. To enter an interval for Period 1, first make sure that the check box next to Period 1 is checked. To check/uncheck select the check box and press OK. Enter the time using the numeric keypad. Period 2 is entered the same way as Period 1. Two intervals can be useful for enabling the lawn for other activities during certain hours, for example by entering Period 1: 00:00- 15:00 and Period 2: 21:00-24:00. The mower will then be parked in the charging station between 15:00 and 21:00. 3.14 Security Through this selection, settings relating to security and the connection between the robotic lawnmower and the charging station can be made. SECURITY Security level Advanced 3.14.1 Security level There are 3 security levels to choose from. To disable mowing a whole day, uncheck both periods. 3.13.6 Copy Use this function to copy the current day settings to other days. Mark Copy by using arrow keys and press OK. Then use the up and down arrow keys to move the cursor between days. The times will be copied to the days that are marked with OK. 3.13.7 Reset This function resets the timer to the factory setting, where the robotic lawnmower is allowed to operate 24 hours a day every day. Reset timer Current day All week 3.13.7.1 Current day This resets the day that is selected in the tab system. The factory setting is that the robotic lawnmower is allowed to operate 24 hours a day. 3.13.7.2 All week This resets all days in the week. The factory setting is that the robotic lawnmower is allowed to operate 24 hours a day every day. Security level Low Medium High Low and Medium security prohibits access to the robotic lawnmower if the PIN code is unknown. High security also includes a warning that beeps if the correct PIN code is not entered after a designated time period. If the wrong PIN code is entered 5 times in succession the robotic lawnmower is blocked for a time. The blockage time is extended for every new incorrect attempt. Function Time lock PIN request Alarm Low Medium High X X X X X X 3.14.1.1 Time lock This function means that the robotic lawnmower cannot be started after 30 days without first entering the correct PIN code. When the 30 days has passed the robotic lawnmower will continue to mow as normal, but the Enter PIN code message appears when the hatch is opened. Enter your code again and press OK. 3.14.1.2 PIN request This function means that the robotic lawnmower requests a PIN code when the main switch is set to 1 and each time the hatch is opened. The correct PIN code must be entered to use the robotic lawnmower. If the wrong PIN code is entered 5 times in succession the robotic lawnmower is blocked for a time. The blockage time is extended for every new incorrect attempt. 3.14.1.3 Alarm This function means that an alarm sounds if the PIN code is not entered within 10 seconds after the STOP button has been pressed or the robotic lawnmower has been lifted up for any reason. A ticking noise indicates 26 - Installation 236 - 001 - 02.10.2017