Husqvarna AUTOMOWER 430X with installation service Owner Manual - Page 58
suspected wire Follow the same approach
View all Husqvarna AUTOMOWER 430X with installation service manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4. If indicator lamp still flashes blue in step 3 above: Put AL and G1 back in their original positions. Then switch AR and G1. If indicator lamp now is lit with a solid green light then disconnect AL and connect a new boundary wire to AL. Connect the other end of this new wire at the middle of the suspected wire section. Follow the same approach as in 3 a) and 3b) above. 5. When the break is found, the damaged section must be replaced with a new wire. Always use original couplers. 58 - Troubleshooting 236 - 001 - 02.10.2017
4.
If indicator lamp still flashes blue in step 3
above: Put AL and G1 back in their original
positions. Then switch AR and G1. If indicator lamp
now is lit with a solid green light then disconnect AL
and connect a new boundary wire to AL. Connect
the other end of this new wire at the middle of the
suspected wire section. Follow the same approach
as in 3 a) and 3b) above.
5.
When the break is found, the damaged section must
be replaced with a new wire. Always use original
couplers.
58
- Troubleshooting
236 - 001 - 02.10.2017