IBM 2388 Hardware Maintenance Manual - Page 55
combinations - thinkpad drivers
UPC - 000435123473
View all IBM 2388 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Product overview Fn key combinations The following table shows the function of each combination of Fn with a function key. Key combination Fn+F1 Fn+F2 Fn+F3 Fn+F4 Fn+F5 Fn+F6 Fn+F7 Fn+F9 Fn+F10 Fn+F11 Fn+F12 Fn+Home Fn+End Fn+Spacebar Description Reserved. Reserved. Turn off the LCD display, leaving the screen blank. To turn the LCD display on again, press any key or the TrackPoint stick. Put the computer in standby mode. To return to normal operation, press the Fn key independently, without pressing a function key. Note: The setting can be changed so that pressing it puts the computer into hibernation mode or even shuts the computer down. Open the Wireless Radio Control screen. Note: To use this function, the PM device driver must be installed on the computer. Reserved. Switch between the computer display and an external monitor (CRT). If an external monitor is attached, computer output is displayed in the following three patterns in turn: v CRT display v Computer display + CRT display v Computer display Note: This setting can be changed so that pressing it starts a presentation scheme directly with no need to start Presentation Director. Open the EasyEject Utility screen. Note: This function is supported only in Windows XP and Windows 2000. Reserved. Reserved. Put the computer into hibernation mode. To return to normal operation, press the power button for less than four seconds. Note: To use Fn+F12 for hibernation, the PM device driver must be installed on the computer. The computer display becomes brighter. The computer display becomes less bright. Enable the FullScreen Magnifier function. ThinkPad G40, G41 51