IBM 2388 Hardware Maintenance Manual - Page 60
Error, messages
UPC - 000435123473
View all IBM 2388 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Symptom-to-FRU index Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load "Setup Defaults" in BIOS Setup Utility. 2. Recharge the backup battery for one hour by connecting the ac adapter to the computer and run BIOS Setup Utility to verify the configuration. 3. Backup battery. 4. System board. Allocation error for device. 1. Load "Setup Defaults" in BIOS Setup Utility. 2. Recharge the backup battery for one hour by connecting the ac adapter to the computer and run BIOS Setup Utility to verify the configuration. 3. Backup battery. 4. System board. Failing bits: nnnn. 1. DIMM. 2. System board. Invalid system configuration data. 1. DIMM. 2. System board. I/O device IRQ conflict. 1. Load "Setup Defaults" in BIOS Setup Utility. 2. Recharge the backup battery for one hour by connecting the ac adapter to the computer and run BIOS Setup Utility to verify the configuration. 3. Backup battery. 4. System board. Operating system not 1. Check that the operating system has found. no failure and is installed correctly. 2. Enter BIOS Setup Utility and see whether the hard disk drive and the diskette drive are properly identified. 3. Reseat the hard disk drive. 4. Reinstall the operating system. 5. Diskette drive. 6. Hard disk drive. 7. System board. Hibernation error. 1. Restore the system configuration to what it was before the computer entered hibernation mode. 2. If memory size has been changed, re-create the hibernation file. Fan error. Fan. 56 ThinkPad G40, G41