IBM 655743N Service Manual - Page 3
Power, Saving, Function, Diagnosis - computers
UPC - 087944378259
View all IBM 655743N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
6557-03N/03S/43N/43S POWER SAVING FUNCTION This monitor meets the power-saving guidelines set by VESA and Energy Star, as well as the more stringent NUTEK . If the monitor is connected to a computer or video graphics board that is VESA DPMS (Display Power Management Signaling) compliant, the monitor will automatically reduce power consumption in three stages as shown below. You can set the delay time before the monitor enters the power saving mode using the OSD. Set the time according to "Setting the power saving delay time" on page 15. Note If no video signal is input to the monitor, the "NO INPUT SIGNAL" message (page 18) appears. After the delay time has passed, the power saving function automatically puts the monitor into the active-off mode and the u indicator lights up orange. Once the horizontal and vertical sync signals are detected, the monitor automatically resumes its normal operation mode. Power consumption mode 1 Normal operation 2 Standby (1st mode) Screen active blank 3 Suspend (2nd mode) blank 4 Active-off (3rd mode) 5 Power-off blank - Horizontal sync signal present absent present absent - Vertical sync signal present present absent absent - Power consumption ≤ 130 W ≤ 80 W Recovery time - Approx. 3 sec. ≤ 15 W Approx. 3 sec. ≤ 5 W 0 W Approx. 15 sec. max. - u indicator Green Green and orange alternate Green and orange alternate Orange Off DIAGNOSIS Failure +B failure Horizontal / Vertical Deflection failure, Thermal protector ABL protector HV failure Aging / Self Test Power LED Orange → Off (0.5 sec) (0.5 sec) Orange → Off (1.5 sec) (0.5 sec) Orange → Off (0.5 sec) (1.5 sec) Orange → Off → Orange → Off (0.25 sec) (0.5 sec) (0.25 sec) (1.25 sec) Orange → Off → Green → Off (0.5 sec) (0.5 sec) (0.5 sec) (0.5 sec) Aging Mode (Video Aging) : During Power Save, press "MENU" key for longer than 2 second. Self Test (OSD Color Bar) : During Power Save, press "CONTRAST" + (/) key for longer than 2 second. Reliability Check Mode : During Power Save, press "CONTRAST"- (?) key for longer than 2 second. - 3 -