IBM 8835 Hardware Maintenance Manual - Page 56
illustration.
UPC - 000435158314
View all IBM 8835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Note: Correct airflow is from the front to the rear of the server. 7. Connect the replacement fan cable to the system board. Note: If you are replacing more than one fan, install all fans in the server before connecting the cables to the system board. Attention: Improper routing of the fan cables could result in crimps or cuts of the fan cabling, which might jeopardize fan performance. When routing cables, make sure that: Heat sink duct a. The cable for Fan 2 is routed up, and then through and around the heat sink duct, as shown in the illustration. b. The cables for Fans 3, 4 and 5 are routed up, and then over to the appropriate connectors on the system board. c. The fan cables do not come into contact with the metal fan bracket when installation is complete. 8. Continue with "Completing the installation" on page 47. 46 325 Type 8835: Hardware Maintenance Manual and Troubleshooting Guide Eserver