IBM 8835 Hardware Maintenance Manual - Page 83
Symptom-to-FRU, index
UPC - 000435158314
View all IBM 8835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 7. Symptom-to-FRU index Beep symptoms 74 No-beep symptoms 75 Diagnostic error codes 76 Error symptoms 78 POST error codes 84 Service processor error codes 86 ServeRAID error codes 86 POST (ISPR) error procedures 88 SCSI error codes 90 Undetermined problems 91 Problem determination tips 92 This index supports 335 servers. Eserver The symptom-to-FRU index lists symptoms, errors, and the possible causes. The most likely cause is listed first. Use this symptom-to-FRU index to help you decide which FRUs to have available when servicing the computer. Notes: 1. Check the configuration before you replace a FRU. Configuration problems can cause false errors and symptoms. 2. For IBM devices not supported by this index, refer to the manual for that device. 3. Always start with "General checkout" on page 13. 4. Some tables have more than two columns; in those instances, more than one column on the left is required to describe the error symptom. Take the action (or replace the FRU) suggested first in the list of the right-hand column, then try the server again to see if the problem has been corrected before taking further action. 5. Always try reseating a suspected component or reconnecting a cable before replacing the component. The left-hand column of the tables in this index lists error codes or messages, and the right-hand column lists one or more suggested actions or FRUs to replace. The POST BIOS code displays POST error codes and messages on the screen. © Copyright IBM Corp. 2002, 2003 73